| About |
|---|
| This resin is a non-toxic, odorless, and odorless white particle. It has good melt flow characteristics and is particularly suitable for thin film extrusion processes. Its excellent properties of tensile resistance, penetration resistance, impact resistance, and tear resistance make it suitable for use as a thin film. Its superior processability is attractive for pipe, sheet extrusion, and all molding applications. |
| Product Description | |
|---|---|
| Supplier | PETROCHEMICAL |
| Generic | Linear low density polyethylene |
| Material Status | Commercial: Active |
| Features | Low coefficient of friction,Low density |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | 2 | g/10min | GB/T 3682-2000 |
| Density | 0.92 | g/cm³ | GB/T 1033.2-2010 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile Strength | |||
| yld | 8 | MPa | GB/T1040.2-2006 |
| brk | 12 | MPa | GB/T1040.2-2006 |
| Tensile Strain | |||
| brk | 400 | % | GB/T1040.2-2006 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |