Cellasto® MH24-40

About
Cellasto is the trade name for BASF Polyurethanes’ high performance, microcellular polyurethane elastomer. Cellasto components have been used successfully for over 35 years as the NVH (Noise, Vibration, Harshness) solution for automotive chassis and suspension applications such as jounce bumpers, shock absorber top mounts and coil spring isolators. Cellasto is also used in many other applications outside of automotive such as: elevator safety buffers; paper conveying components; friction dampers; sub-frame, motor & body mounts; and more. The outstanding features are: Low compression set High volume compressibility with minimum lateral expansion Excellent mechanical properties & durability Highly versatile – noise isolation at small amplitude & high frequency; vibration isolation at large amplitude & low frequency Abrasion resistant Resistant to ozone, oils, greases and other aliphatic hydrocarbons&&

About

Cellasto is the trade name for BASF Polyurethanes’ high performance, microcellular polyurethane elastomer. Cellasto components have been used successfully for over 35 years as the NVH (Noise, Vibration, Harshness) solution for automotive chassis and suspension applications such as jounce bumpers, shock absorber top mounts and coil spring isolators. Cellasto is also used in many other applications outside of automotive such as: elevator safety buffers; paper conveying components; friction dampers; sub-frame, motor & body mounts; and more. The outstanding features are: Low compression set High volume compressibility with minimum lateral expansion Excellent mechanical properties & durability Highly versatile – noise isolation at small amplitude & high frequency; vibration isolation at large amplitude & low frequency Abrasion resistant Resistant to ozone, oils, greases and other aliphatic hydrocarbons&&

Product Description
Supplier	BASF
Generic	PU
Material Status	Commercial: Active
Features	Durability,Good wear resistance,Good Dimensional Stability,Hydrocarbons,Ozone resistance,Grease resistance,noise reduction
Availabilitys	Latin America,North America,Europe,Africa & Middle East ,Asia Pacific
Process Methods	Foam treatment

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.40	g/cm³	ASTM D3574A

elastic body	Nominal value	Unit	Test method
tensile strength	3.50	MPa	ASTM D3574E
Tensile strain
fracture	350	%	ASTM D3574E
tear strength	10.0	kN/m
Compression deformation			ASTM D3574D
20℃，70 hr	3.5	%	ASTM D3574D
70℃，22 hr	5.0	%	ASTM D3574D

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.