| About |
|---|
| E-glass fiber reinforced, thermoset polymer pultruded profiles (square, tube and rod)&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | 热固性复合材料 |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| Curing treatment | 1.80 to 2.00 | g/cm³ | ASTM D792 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ash Content | |||
| Continuous glass fiber | 70.0 | % |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Babbitt hardness | 50 to 60 | ASTM D2583 | |
| Tensile modulus | 37900 to 48300 | MPa | ASTM D638 |
| tensile strength | 758 to 1030 | MPa | ASTM D638 |
| Bending modulus | 37900 to 44800 | MPa | ASTM D790 |
| bending strength | 689 to 896 | MPa | ASTM D790 |
| compressive strength | 414 to 758 | MPa | ASTM D695 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |