| About |
|---|
| TAISOX® 6634F is a Low Density Polyethylene material. It is available in Asia Pacific, Europe, or North America for injection molding. Important attributes of TAISOX® 6634F are: Antiblock High Flow Rigid Slip Typical application of TAISOX® 6634F: Film&& |
| Product Description | |
|---|---|
| Supplier | fpc-tw |
| Generic | LDPE |
| Material Status | Commercial: Active |
| Features | Smoothness,High liquidity,Low density |
| Availabilitys | North America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 8.0 | g/10min | ASTM D1238 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| film thickness | |||
| test | 30 | µm | |
| film thickness | 0.4-2 mil (10-50 µ | ||
| Secant modulus | ASTM D882 | ||
| 1% secant, MD: 30 µ m, blow molded film | 177 | MPa | ASTM D882 |
| 1% secant, TD: 30 µ m, blow molded film | 206 | MPa | ASTM D882 |
| tensile strength | ASTM D882 | ||
| MD, yield, 30 µ m, blow molded film | 9.81 | MPa | ASTM D882 |
| TD, yield, 30 µ m, blow molded film | 10.8 | MPa | ASTM D882 |
| MD : Break, 1.2 mil, Blown Film | 15.7 | MPa | ASTM D882 |
| TD, fracture, 30 µ m, blow molded film | 13.7 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| fracture | 500 | % | ASTM D638 |
| MD : Break, 1.2 mil, Blown Film | 280 | % | ASTM D882 |
| TD, fracture, 30 µ m, blow molded film | 500 | % | ASTM D882 |
| Drop hammer impact | |||
| 30 µ m, blow molded film | 65 | g | ASTM D1709 |
| Elmandorf tear strength | ASTM D1922 | ||
| MD: 30 µ m, blow molded film | 240 | g | ASTM D1922 |
| TD: 30 µ m, blow molded film | 1900 | g | ASTM D1922 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Embrittlement temperature | -70.0 | ℃ | ASTM D746 |
| Vicat Softening Temp | 92.0 | ℃ | ASTM D1525 |
| Melting temperature | 112 | ℃ |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 45 °, 30 µ m, blow molded film | 90 | ASTM D2457 | |
| Haze | |||
| 30 µ m, blow molded film | 8.0 | % | ASTM D1003 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 52 | ASTM D2240 | |
| tensile strength | ASTM D638 | ||
| yield | 10.8 | MPa | ASTM D638 |
| fracture | 11.8 | MPa | ASTM D638 |
| Bending modulus | 186 | MPa | ASTM D790 |
| friction coefficient | |||
| Blown film | 0.12 | ASTM D1894 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |