| About |
|---|
| Stat-Rite® S1100 is a static dissipative TPU alloy. Stat-Rite S1100 utilizes the patented Stat-Rite inherently dissipative polymer (IDP) alloy system to provide clean, permanent ESD protection. Stat-Rite® IDP alloys provide consistent static dissipation even when extruded, injection molded or thermoformed into components.&& |
| Product Description | |
|---|---|
| Supplier | Lubrizol Advanced Materials |
| Generic | 其他TPU合金 |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Renewable resources,Halogen free,Food contact compliance,Good bond,Soft |
| Availabilitys | Asia Pacific |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.16 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 90 | ASTM D2240 | |
| Shaw’s D | 47 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D412 | ||
| fracture | 26.0 | MPa | ASTM D412 |
| 100% strain | 8.00 | MPa | ASTM D412 |
| 300% strain | 15.0 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 450 | % | ASTM D412 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | |||
| — | 5.0E+9 | ohms | ASTM D257 |
| — | 5.0E+8 | ohms | ESD S11.11 |
| Volume resistivity | 5.0E+9 | ohms·cm | ASTM D257 |
| Electrostatic attenuation | |||
| +1000 V to 100 V | 0.1 | sec | |
| +5000 V to 50 V | 0.0100 | sec | |
| -5000 V to -50 V | 0.0100 | sec |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Ion content | Internal Method | ||
| Anionic Br- | < 2.00 | ng/cm² | Internal Method |
| Anion Cl- | 6.00 | ng/cm² | Internal Method |
| Anion F- | 1.00 | ng/cm² | Internal Method |
| Anion NO3- | 10.0 | ng/cm² | Internal Method |
| Anion PO4- | 50.0 | ng/cm² | Internal Method |
| Anion SO4- | 10.0 | ng/cm² | Internal Method |
| Outgassing | Internal Method | ||
| MMA | 0.0400 | µg/g | Internal Method |
| Styrene | < 0.0200 | µg/g | Internal Method |
| Toluene | < 0.0200 | µg/g | Internal Method |
| Total Organics | 4.50 | µg/g | Internal Method |
| nonvolatile content | 1.00 | µg/cm² | Internal Method |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 12% RH |
| 3. 50% RH |
| 4. Charged Plate Monitor, 50% RH |
| 5. FTMS-101C, 12% RH |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |