| About |
|---|
| OP – PEI 1000是一种聚醚酰亚胺(PEI)材料,。 该产品在北美洲有供货,加工方式为:注射成型。 OP – PEI 1000的主要特性为:阻燃/额定火焰。&& |
| Product Description | |
|---|---|
| Generic | Polyetherimide |
| Material Status | Commercial: Active |
| Availabilitys | North America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.27 | g/cm³ | ASTM D792 |
| Shrinkage rate | |||
| MD：3.2 mm | 0.50 | % | ASTM D995 |
| TD：3.2 mm | 0.70 | % | ASTM D995 |
| Melt Flow Rate | |||
| 337℃，6.60kg | 9.0 | g/10min | ASTM D1238 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa, unannealed | 210 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 201 | ℃ | ASTM D648 |
| Vicat Softening Temp | |||
| 218 | ℃ | ASTM D1525 | |
| Thermal conductivity coefficient | 0.220 | W/m/K | JIS R2618 |
| Linear coefficient of thermal expansion | |||
| MD | 5.4E-5 | 1/℃ | ASTM D696 |
| TD | 5.5E-5 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volumetric resistance | 1.0E+17 | Ω.cm | ASTM D257 |
| Insulation strength | |||
| 3.20mm | 19 | KV/mm | ASTM D149 |
| Dielectric constant | |||
| 3.15 | 1 kHz | ASTM D150 | |
| Dissipation factor | |||
| 0.0012 | ASTM D150 | ||
| Compared to the leakage tracing index | 100-175 | V | ASTM D3638 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | |||
| 0.80mm | V-0 | UL 94 | |
| 0.40mm | V-2 | UL 94 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Rockwell hardness | 100 | M 级 | ASTM D785 |
| tensile strength | |||
| Yield, 23 ℃ | 110 | MPa | ASTM D638 |
| Tensile strain | |||
| Yield, 23 ℃ | 7.0 | % | ASTM D638 |
| Fracture, 23 ℃ | 60 | % | ASTM D638 |
| Tensile modulus | |||
| 23℃ | 3580 | MPa | ASTM D638 |
| bending strength | |||
| Yield, 23 ℃ | 165 | MPa | ASTM D790 |
| Bending modulus | |||
| 23℃ | 3510 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| Notched impact strength of cantilever beam | |||
| 23℃ | 1335 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |