| About |
|---|
| Fluon®PTFE FC has improved creep and wear resistance. A wide range of fillers such as glass fiber, graphite, bronze, carbon fiber are available. Properties of each grades are listed later in tables. Applications: bearing gasket valvedisk V-ring O-ring plug valve sheet pump impeller mechanical seal Characteristics: improved wear resistance. improved compression resistance filler can be damaged by strong base and hydrogen fluoride improved power flow for Z-type of PA&& |
| Product Description | |
|---|---|
| Supplier | Asahi Glass |
| Generic | PTFE |
| Material Status | Commercial: Active |
| Features | Good liquidity |
| Availabilitys | North America |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | |||
| — | 2.22 | g/cm³ | |
| — | 0.880 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 22.1 | MPa | |
| Tensile strain | |||
| fracture | 320 | % |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Average particle size | 715.0 | µm |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |