PETLIN LD M050X

About
PETLIN LD M050X is a low density polyethylene resin designed primarily for injection molding applications. It is produced by the state-of-the-art DSM Stamicarbon tubular process. It contains antioxidant (BHT free).&&

Product Description
Generic	LDPE
Material Status	Commercial: Active
Features	Good surface appearance,High liquidity,Low speed solidification point,Food contact compliance,Inoxidizability
Availabilitys	Asia Pacific
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.919	g/cm³	ISO 1183/A
Melt Flow Rate
190℃，2.16kg	50	g/10min	ISO 1133
ESCR(Environmental Stress Cracking Resistance)	0.500	hr	Internal Method

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ISO 180/1A
-30℃	5.0	kJ/m²	ISO 180-1A
23℃	41	kJ/m²	ISO 180-1A

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	78.0	℃	ISO 306
Melting temperature
DSC	104	℃	DIN 53765

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	43		ISO 868
Tensile modulus	168	MPa	ISO 527-2
tensile strength			ISO 527-2
yield	8.00	MPa	ISO 527-2
fracture	7.00	MPa	ISO 527-2
Tensile strain
fracture	200	%	ISO 527-2
Tensile creep modulus			ISO 899-1
1 hr	73.0	MPa	ISO 899-1
1000 hr	38.0	MPa	ISO 899-1

Process Conditions
injection	Nominal value	Unit	Test method
Processing (melt) temperature	180 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.