| About |
|---|
| Feature: High adhesiveness for metal and high anti corrosion. Contains 5% ofVAcM. Low viscosity and low deterioration Use: Under body coatings, carpet backing and chipping proof paint&& |
| Product Description | |
|---|---|
| Supplier | HANWHA |
| Generic | PVC, not specified |
| Material Status | Commercial: Active |
| Features | Low Viscosity,Corrosion Resistant,Good bond |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| Supplementary information | Nominal value | Unit | Test method |
| content | |||
| VAcM | 4.5 to 6.5 | % | Internal Method |
| Aggregation degree | |||
| DP | 1600 to 1800 | JIS K6720-2 | |
| K-Value | 76.0 | DIN 53726 | |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Apparent density | 0.19 to 0.27 | g/cm³ | ASTM D1895 |
| Volatiles | < 0.80 | % | ASTM D3030 |
| Particle size | |||
| 100Mesh，150µm Sieve Pass % | 100 | % | Internal Method |
| Brookfield viscosity | |||
| cps/6rpm | < 5000 | ASTM D1824 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |