Halar® 6014F - SOLIAO

About
Halar® 6014F is a clear, semi-crystalline melt processable fluorinated resin. It is designed for electrostatic powder coatings and is particularly recommended for use as a topcoat in protection and anti-corrosion applications. Halar® 6014F exhibits very good chemical, electrical and thermal properties. It is exceptionally pure, easily processed and has optimum permeation and flame resistance. Additionally Halar® 6014F coatings can be used to achieve higher coating thickness compared to Halar® 6014 with very good surface finish and hardness. Main features of Halar® 6014F include: High build up Very good chemical resistance Very good thermal properties Optimum permeation resistance Outstanding flame resistance Very good surface characteristics Purity&&

About

Halar® 6014F is a clear, semi-crystalline melt processable fluorinated resin. It is designed for electrostatic powder coatings and is particularly recommended for use as a topcoat in protection and anti-corrosion applications. Halar® 6014F exhibits very good chemical, electrical and thermal properties. It is exceptionally pure, easily processed and has optimum permeation and flame resistance. Additionally Halar® 6014F coatings can be used to achieve higher coating thickness compared to Halar® 6014 with very good surface finish and hardness. Main features of Halar® 6014F include: High build up Very good chemical resistance Very good thermal properties Optimum permeation resistance Outstanding flame resistance Very good surface characteristics Purity&&

Product Description
Supplier	Solvay
Generic	ECTFE
Material Status	Commercial: Active
Features	Excellent Processability,High purity,Good surface appearance,Good Electrical Properties,Good Hardness,Corrosion Resistant,Hypocrystalline,Solvent resistance,Heat Stabilized
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.68	g/cm³	ASTM D3275
Melt Flow Rate
275℃，2.16kg	7.0	g/10min	ASTM D3275
Average particle size	80	µm	ASTM D1921

THERMAL	Nominal value	Unit	Test method
Melting temperature	225	℃	ASTM D3275

Notes
1. Typical properties: these are not to be construed as specifications.
2. Method C
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.