Ingeo™ 4043D

About
Ingeo 4043D – a product from NatureWorks LLC – can be converted into a biaxially oriented film with use temperatures up to 265°F (130°C). This film has excellent optics, good machinability and excellent twist and deadfold. These properties make 4043D film an ideal candidate for candy twist wrap and other packaging applications. Additional properties include advantageous barrier to flavor and grease and superior oil resistance.&&

About

Ingeo 4043D – a product from NatureWorks LLC – can be converted into a biaxially oriented film with use temperatures up to 265°F (130°C). This film has excellent optics, good machinability and excellent twist and deadfold. These properties make 4043D film an ideal candidate for candy twist wrap and other packaging applications. Additional properties include advantageous barrier to flavor and grease and superior oil resistance.&&

Product Description
Generic	PLA
Material Status	Commercial: Active
Features	High elastic,Renewable resources,Optical performance,Machinable,Retention of aroma ,Biodegradable,Food contact compliance,Compostable,Grease resistance
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.24	g/cm³	ASTM D792
Melt Flow Rate
210℃，2.16kg	6.0	g/10min	ASTM D1238
Relative viscosity
30℃	4.00		ASTM D5225

MECHANICAL	Nominal value	Unit	Test method
Bending modulus	3830	MPa	ASTM D790
bending strength	82.7	MPa	ASTM D790

film	Nominal value	Unit	Test method
Elastic modulus
MD	3610	MPa	ASTM D882
tensile strength
MD, fracture	53.1	MPa	ASTM D882
MD, yield	60.0	MPa	ASTM D882
Tensile strain
MD, fracture	6.0	%	ASTM D882

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch	16	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	55.0	℃	ASTM E2092
Glass transition temperature	55.0 to 60.0	℃	ASTM D3418
Crystallization peak temperature
DSC	145 to 160	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	79	°C
Drying time	4.0	hr
Recommended maximum moisture content	0.025	%
Hopper temperature	45	°C
Barrel 1 zone temperature	179	°C
Barrel 2 zone temperature	191	°C
Barrel 3 zone temperature	199	°C
Connector temperature	199	°C
Melt temperature	210	°C
Nozzle temperature	199	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.