Bormed™ SC820CF

About
Bormed SC820CF is a soft random heterophasic copolymer. The current version of Bormed SC820CF has been scheduled for deletion. Please refer to Bormed SC820CF-11 documentation for new projects. In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer. This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown film on tubular water quenching process. CAS-No.: 9010-79-1 Applications Bormed SC820CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed SC820CF . Medical device packaging Pouches for IV solutions Pouches for Continuous Ambulatory Peritoneal Dialysis Secondary packaging This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features High gloss High toughness at low temperatures High softness Sterilisability by means of water steam Low haze High water vapour barrier High impact strength at 23 °C&&

About

Bormed SC820CF is a soft random heterophasic copolymer. The current version of Bormed SC820CF has been scheduled for deletion. Please refer to Bormed SC820CF-11 documentation for new projects. In case of questions, please contact either your responsible Borealis Sales Manager and/or Application Development Engineer. This grade is suitable for the manufacturing of non-oriented cast films on chill roll process and blown film on tubular water quenching process. CAS-No.: 9010-79-1 Applications Bormed SC820CF has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed SC820CF . Medical device packaging Pouches for IV solutions Pouches for Continuous Ambulatory Peritoneal Dialysis Secondary packaging This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special features High gloss High toughness at low temperatures High softness Sterilisability by means of water steam Low haze High water vapour barrier High impact strength at 23 °C&&

Product Description
Supplier	Borealis AG
Generic	PP copolymer
Material Status	Commercial: Active
Features	Excellent Processability,Good Clarity,Good flexibility,Good surface appearance,High impact resistance,Steam sterilized,Renewable resources,Poor moisture permeability,Soft
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Film extrusion

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Melt Flow Rate
230℃，2.16kg	3.9	g/10min	ISO 1133

MECHANICAL	Nominal value	Unit	Test method
Bending modulus
23 ℃, injection molding	550	MPa	ISO 178
friction coefficient	> 0.70		ISO 8295

film	Nominal value	Unit	Test method
film thickness
test	50	µm
Tensile modulus			ISO 527-3
MD，50 µm	330	MPa	ISO 527-3
TD，50 µm	330	MPa	ISO 527-3
tensile strength			ISO 527-3
MD，50 µm	50.0	MPa	ISO 527-3
TD，50 µm	50.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
MD, fracture, 50 µ m	650	%	ISO 527-3
TD, fracture, 50 µ m	670	%	ISO 527-3
Dart impact equipped with measuring instruments
50 µm，Total Energy	30.0	J	ISO 7765-2

THERMAL	Nominal value	Unit	Test method
Melting temperature	141	℃	ISO 11357-3

optical performance	Nominal value	Unit	Test method
gloss
20°，50 µm	> 120		ASTM D2457
Haze
50 µm	< 1.0	%	ASTM D1003

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.