Texin® 945 U - SOLIAO

About
Texin 945U resin is a polyether-based thermoplastic polyurethane with a Shore hardness of approximately 45D. It can be processed by injection molding, extrusion, or blow molding.&&

Product Description
Supplier	Covestro
Generic	TPU-醚
Material Status	Commercial: Active
Features	Good flexibility,High impact resistance,Hydrolysis stability,Good wear resistance,Heat Stabilized
Availabilitys	North America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ASTM D792
Density	1.14	g/cm³	ISO 1183
Shrinkage rate			ISO 2577
TD：2.54 mm	0.80	%	ASTM D955
MD：2.54 mm	0.80	%	ASTM D955
TD：2.54 mm	0.80	%	ISO 2577
MD：2.54 mm	0.80	%	ISO 2577

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	45		ISO 868
Shaw’s D	45		ASTM D2240
Bending modulus			ASTM D790
23℃	103	MPa	ASTM D790
70℃	34.5	MPa	ASTM D790
Bending modulus			ISO 178
23℃	103	MPa	ISO 178
70℃	34.5	MPa	ISO 178
Taber abraser
1000 cycles, 1000 g, H-18 wheels	60.0	mg	ISO 4649
1000 cycles, 1000 g, H-18 wheels	60.0	mg	ASTM D1044

elastic body	Nominal value	Unit	Test method
tensile strength
yield	46.2	MPa	ASTM D412
yield	46.2	MPa	ISO 37
300% strain	27.6	MPa	ISO 37
300% strain	27.6	MPa	ASTM D412
100% strain	12.4	MPa	ASTM D412
100% strain	12.4	MPa	ISO 37
50% strain	9.70	MPa	ISO 37
50% strain	9.70	MPa	ASTM D412
Tensile strain
fracture	400	%	ISO 37
fracture	400	%	ASTM D412
tear strength	127	kN/m	ASTM D624
tear strength	130	kN/m	ISO 34-1
Compression deformation			ASTM D395B
23℃，22 hr	20	%	ASTM D395B
23℃，22 hr	22	%	ASTM D395B
70℃，22 hr	40	%	ASTM D395B
70℃，22 hr	75	%	ASTM D395B
Compression deformation			ISO 815
23℃，22 hr	20	%	ISO 815
23℃，22 hr	22	%	ISO 815
70℃，22 hr	75	%	ISO 815
70℃，22 hr	40	%	ISO 815
Basho’s elasticity	35	%	ASTM D2632

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	< -68.0	℃	ASTM D746
Embrittlement temperature	< -68.0	℃	ISO 974
Glass transition temperature	-40.0	℃	DMA
Vicat Softening Temp	116	℃	ASTM D1525 4
Vicat Softening Temp	116	℃	ISO 306/50

Aging performance	Nominal value	Unit	Test method
The rate of change in tensile strength in air			ASTM D573
100℃，70 hr	0.0	%	ASTM D573
100% Strain，100℃，70 hr	7.0	%	ASTM D573
300% Strain，100℃，70 hr	5.0	%	ASTM D573
100℃，168 hr	-4.0	%	ASTM D573
100% Strain，100℃，168 hr	6.0	%	ASTM D573
300% Strain，100℃，168 hr	-1.0	%	ASTM D573
100℃，336 hr	-4.0	%	ASTM D573
100% Strain，100℃，336 hr	6.0	%	ASTM D573
300% Strain，100℃，336 hr	-1.0	%	ASTM D573
100℃，504 hr	-8.0	%	ASTM D573
100% Strain，100℃，504 hr	5.0	%	ASTM D573
300% Strain，100℃，504 hr	-3.0	%	ASTM D573
The rate of change in tensile strength in air			ISO 216
100℃，70 hr	0.0	%	ISO 216
100% Strain 100℃，70 hr	7.0	%	ISO 216
300% Strain 100℃，70 hr	5.0	%	ISO 216
100℃，168 hr	-4.0	%	ISO 216
100% Strain 100℃，168 hr	6.0	%	ISO 216
300% Strain 100℃，168 hr	-1.0	%	ISO 216
100℃，336 hr	-4.0	%	ISO 216
100% Strain 100℃，336 hr	6.0	%	ISO 216
300% Strain 100℃，336 hr	-1.0	%	ISO 216
100℃，504 hr	-8.0	%	ISO 216
100% Strain 100℃，504 hr	5.0	%	ISO 216
300% Strain 100℃，504 hr	-3.0	%	ISO 216
The rate of change in ultimate elongation in air			ASTM D573
100℃，70 hr	9.0	%	ASTM D573
100℃，168 hr	14	%	ASTM D573
100℃，336 hr	13	%	ASTM D573
100℃，504 hr	17	%	ASTM D573
Changes in tensile stress during fracture in air			ISO 216
100℃，70 hr	9.0	%	ISO 216
100℃，168 hr	14	%	ISO 216
100℃，336 hr	13	%	ISO 216
100℃，504 hr	17	%	ISO 216
The rate of change in hardness of a hardness tester in the air			ASTM D573
Shore D, 100 ℃, 70 hr	-1.0		ASTM D573
Shore D, 100 ℃, 168 hr	0.0		ASTM D573
Shore D, 100 ℃, 336 hr	-1.0		ASTM D573
Shore D, 100 ℃, 504 hr	0.0		ASTM D573
The rate of change of Shore hardness in air			ISO 216
Shore D, 100 ℃, 70 hr	-1.0		ISO 216
Shore D, 100 ℃, 168 hr	0.0		ISO 216
Shore D, 100 ℃, 336 hr	-1.0		ISO 216
Shore D, 100 ℃, 504 hr	0.0		ISO 216
The rate of change in tensile strength			ASTM D471
23℃，70 hr，in Reference Fuel A（Isooctane）	10	%	ASTM D471
100% Strain，23℃，70 hr，in Reference Fuel A（Isooctane）	-2.0	%	ASTM D471
300% Strain，23℃，70 hr，in Reference Fuel A（Isooctane）	-3.0	%	ASTM D471
23 ℃, 70 hr, methanol	-25	%	ASTM D471
100% Strain，23℃，70 hr，in Reference Fuel C	-32	%	ASTM D471
300% Strain，23℃，70 hr，in Reference Fuel C	-33	%	ASTM D471
23℃，168 hr，in Reference Fuel A（Isooctane）	4.0	%	ASTM D471
100% Strain，23℃，168 hr，in Reference Fuel A（Isooctane）	8.0	%	ASTM D471
300% Strain，23℃，168 hr，in Reference Fuel A（Isooctane）	0.0	%	ASTM D471
23 ℃, 168 hr, methanol	-26	%	ASTM D471
100% Strain，23℃，168 hr，in Reference Fuel C	-28	%	ASTM D471
300% Strain，23℃，168 hr，in Reference Fuel C	-30	%	ASTM D471
23℃，336 hr，in Reference Fuel A（Isooctane）	8.0	%	ASTM D471
100% Strain，23℃，336 hr，in Reference Fuel A（Isooctane）	1.0	%	ASTM D471
300% Strain，23℃，336 hr，in Reference Fuel A（Isooctane）	-5.0	%	ASTM D471
23℃，336 hr，in Reference Fuel C	-28	%	ASTM D471
100% Strain，23℃，336 hr，in Reference Fuel C	-27	%	ASTM D471
300% Strain，23℃，336 hr，in Reference Fuel C	-30	%	ASTM D471
23℃，504 hr，in Reference Fuel A（Isooctane）	7.0	%	ASTM D471
100% Strain，23℃，504 hr，in Reference Fuel A（Isooctane）	-4.0	%	ASTM D471
300% Strain，23℃，504 hr，in Reference Fuel A（Isooctane）	-8.0	%	ASTM D471
23℃，504 hr，in Reference Fuel C	-24	%	ASTM D471
100% Strain，23℃，504 hr，in Reference Fuel C	-27	%	ASTM D471
300% Strain，23℃，504 hr，in Reference Fuel C	-28	%	ASTM D471
100 ℃, 70 hr, in ASTM # 1 oil	-4.0	%	ASTM D471
100% Strain，100℃，70 hr，in ASTM #1 Oil	10	%	ASTM D471
300% Strain，100℃，70 hr，in ASTM #1 Oil	8.0	%	ASTM D471
100 ℃, 70 hr, in ASTM # 3 oil	10	%	ASTM D471
100% Strain，100℃，70 hr，in ASTM #3 Oil	2.0	%	ASTM D471
300% Strain，100℃，70 hr，in ASTM #3 Oil	-1.0	%	ASTM D471
100℃，168 hr，in ASTM #1 Oil	-11	%	ASTM D471
100% Strain，100℃，168 hr，in ASTM #1 Oil	4.0	%	ASTM D471
300% Strain，100℃，168 hr，in ASTM #1 Oil	-4.0	%	ASTM D471
100℃，168 hr，in ASTM #3 Oil	9.0	%	ASTM D471
100% Strain，100℃，168 hr，in ASTM #3 Oil	-7.0	%	ASTM D471
300% Strain，100℃，168 hr，in ASTM #3 Oil	-10	%	ASTM D471
100℃，336 hr，in ASTM #1 Oil	-11	%	ASTM D471
100% Strain，100℃，336 hr，in ASTM #1 Oil	11	%	ASTM D471
300% Strain，100℃，336 hr，in ASTM #1 Oil	0.0	%	ASTM D471
100℃，336 hr，in ASTM #3 Oil	7.0	%	ASTM D471
100% Strain，100℃，336 hr，in ASTM #3 Oil	2.0	%	ASTM D471
300% Strain，100℃，336 hr，in ASTM #3 Oil	-7.0	%	ASTM D471
100℃，504 hr，in ASTM #1 Oil	-14	%	ASTM D471
100% Strain，100℃，504 hr，in ASTM #1 Oil	5.0	%	ASTM D471
300% Strain，100℃，504 hr，in ASTM #1 Oil	-9.0	%	ASTM D471
100℃，504 hr，in ASTM #3 Oil	-9.0	%	ASTM D471
100% Strain，100℃，504 hr，in ASTM #3 Oil	-4.0	%	ASTM D471
300% Strain，100℃，504 hr，in ASTM #3 Oil	-15	%	ASTM D471
The rate of change in tensile strength			ISO 175
23℃，70 hr，in Reference Fuel A（Isooctane）	10	%	ISO 175
100% Strain，23℃，70 hr，in Reference Fuel A（Isooctane）	-2.0	%	ISO 175
300% Strain，23℃，70 hr，in Reference Fuel A（Isooctane）	-3.0	%	ISO 175
23 ℃, 70 hr, methanol	-25	%	ISO 175
100% Strain，23℃，70 hr，in Reference Fuel C	-32	%	ISO 175
300% Strain，23℃，70 hr，in Reference Fuel C	-33	%	ISO 175
23℃，168 hr，in Reference Fuel A（Isooctane）	4.0	%	ISO 175
100% Strain，23℃，168 hr，in Reference Fuel A（Isooctane）	8.0	%	ISO 175
300% Strain，23℃，168 hr，in Reference Fuel A（Isooctane）	0.0	%	ISO 175
23 ℃, 168 hr, methanol	-26	%	ISO 175
100% Strain，23℃，168 hr，in Reference Fuel C	-28	%	ISO 175
300% Strain，23℃，168 hr，in Reference Fuel C	-30	%	ISO 175
23℃，336 hr，in Reference Fuel A（Isooctane）	8.0	%	ISO 175
100% Strain，23℃，336 hr，in Reference Fuel A（Isooctane）	1.0	%	ISO 175
300% Strain，23℃，336 hr，in Reference Fuel A（Isooctane）	-5.0	%	ISO 175
23℃，336 hr，in Reference Fuel C	-28	%	ISO 175
100% Strain，23℃，336 hr，in Reference Fuel C	-27	%	ISO 175
300% Strain，23℃，336 hr，in Reference Fuel C	-30	%	ISO 175
23℃，504 hr，in Reference Fuel A（Isooctane）	7.0	%	ISO 175
100% Strain，23℃，504 hr，in Reference Fuel A（Isooctane）	-4.0	%	ISO 175
300% Strain，23℃，504 hr，in Reference Fuel A（Isooctane）	-8.0	%	ISO 175
23℃，504 hr，in Reference Fuel C	-24	%	ISO 175
100% Strain，23℃，504 hr，in Reference Fuel C	-27	%	ISO 175
300% Strain，23℃，504 hr，in Reference Fuel C	-28	%	ISO 175
100 ℃, 70 hr, in ASTM # 1 oil	-4.0	%	ISO 175
100% Strain，100℃，70 hr，in ASTM #1 Oil	10	%	ISO 175
300% Strain，100℃，70 hr，in ASTM #1 Oil	8.0	%	ISO 175
100 ℃, 70 hr, in ASTM # 3 oil	10	%	ISO 175
100% Strain，100℃，70 hr，in ASTM #3 Oil	2.0	%	ISO 175
300% Strain，100℃，70 hr，in ASTM #3 Oil	-1.0	%	ISO 175
100℃，168 hr，in ASTM #1 Oil	-11	%	ISO 175
100% Strain，100℃，168 hr，in ASTM #1 Oil	4.0	%	ISO 175
300% Strain，100℃，168 hr，in ASTM #1 Oil	-4.0	%	ISO 175
100℃，168 hr，in ASTM #3 Oil	9.0	%	ISO 175
100% Strain，100℃，168 hr，in ASTM #3 Oil	-7.0	%	ISO 175
300% Strain，100℃，168 hr，in ASTM #3 Oil	-10	%	ISO 175
100℃，336 hr，in ASTM #1 Oil	-11	%	ISO 175
100% Strain，100℃，336 hr，in ASTM #1 Oil	11	%	ISO 175
300% Strain，100℃，336 hr，in ASTM #1 Oil	0.0	%	ISO 175
100℃，336 hr，in ASTM #3 Oil	7.0	%	ISO 175
100% Strain，100℃，336 hr，in ASTM #3 Oil	2.0	%	ISO 175
300% Strain，100℃，336 hr，in ASTM #3 Oil	-7.0	%	ISO 175
100℃，504 hr，in ASTM #1 Oil	-14	%	ISO 175
100% Strain，100℃，504 hr，in ASTM #1 Oil	5.0	%	ISO 175
300% Strain，100℃，504 hr，in ASTM #1 Oil	-9.0	%	ISO 175
100℃，504 hr，in ASTM #3 Oil	-9.0	%	ISO 175
100% Strain，100℃，504 hr，in ASTM #3 Oil	-4.0	%	ISO 175
300% Strain，100℃，504 hr，in ASTM #3 Oil	-15	%	ISO 175
Change rate of ultimate elongation			ASTM D471
23℃，70 hr，in Reference Fuel A（Isooctane）	5.0	%	ASTM D471
23 ℃, 70 hr, methanol	-5.0	%	ASTM D471
23℃，168 hr，in Reference Fuel A（Isooctane）	1.0	%	ASTM D471
23 ℃, 168 hr, methanol	-4.0	%	ASTM D471
23℃，336 hr，in Reference Fuel A（Isooctane）	4.0	%	ASTM D471
23℃，336 hr，in Reference Fuel C	-6.0	%	ASTM D471
23℃，504 hr，in Reference Fuel A（Isooctane）	6.0	%	ASTM D471
23℃，504 hr，in Reference Fuel C	-6.0	%	ASTM D471
100 ℃, 70 hr, in ASTM # 1 oil	11	%	ASTM D471
100 ℃, 70 hr, in ASTM # 3 oil	19	%	ASTM D471
100℃，168 hr，in ASTM #1 Oil	21	%	ASTM D471
100℃，168 hr，in ASTM #3 Oil	32	%	ASTM D471
100℃，336 hr，in ASTM #1 Oil	20	%	ASTM D471
100℃，336 hr，in ASTM #3 Oil	25	%	ASTM D471
100℃，504 hr，in ASTM #1 Oil	24	%	ASTM D471
100℃，504 hr，in ASTM #3 Oil	30	%	ASTM D471
Changes in tensile stress during fracture			ISO 175
23℃，70 hr，in Reference Fuel A（Isooctane）	5.0	%	ISO 175
23 ℃, 70 hr, methanol	-5.0	%	ISO 175
23℃，168 hr，in Reference Fuel A（Isooctane）	1.0	%	ISO 175
23 ℃, 168 hr, methanol	-4.0	%	ISO 175
23℃，336 hr，in Reference Fuel A（Isooctane）	4.0	%	ISO 175
23℃，336 hr，in Reference Fuel C	-6.0	%	ISO 175
23℃，504 hr，in Reference Fuel A（Isooctane）	6.0	%	ISO 175
23℃，504 hr，in Reference Fuel C	-6.0	%	ISO 175
100 ℃, 70 hr, in ASTM # 1 oil	11	%	ISO 175
100 ℃, 70 hr, in ASTM # 3 oil	19	%	ISO 175
100℃，168 hr，in ASTM #1 Oil	21	%	ISO 175
100℃，168 hr，in ASTM #3 Oil	32	%	ISO 175
100℃，336 hr，in ASTM #1 Oil	20	%	ISO 175
100℃，336 hr，in ASTM #3 Oil	25	%	ISO 175
100℃，504 hr，in ASTM #1 Oil	24	%	ISO 175
100℃，504 hr，in ASTM #3 Oil	30	%	ISO 175
The rate of change in Shore hardness			ASTM D471
Shore D, 23 ℃, 70 hr, in reference fuel A (isooctane)	-1.0		ASTM D471
Shore D, 23°C, 70 hr, in Reference Fuel C	-6.0		ASTM D471
Shore D, 23 ℃, 168 hr, in reference fuel A (isooctane)	-1.0		ASTM D471
Shore D, 23 ℃, 168 hr, in reference fuel	-5.0		ASTM D471
Shore D, 23 ℃, 336 hr, in reference fuel A (isooctane)	0.0		ASTM D471
Shore D, 23 ℃, 336 hr, in reference fuel C	-7.0		ASTM D471
Shore D, 23 ℃, 504 hr, in reference fuel A (isooctane)	-1.0		ASTM D471
Shore D, 23 ℃, 504 hr, in reference fuel C	-6.0		ASTM D471
Shore D, 100°C, 70 hr, in ASTM #1 Oil	-1.0		ASTM D471
Shore D, 100 ℃, 70 hr, in ASTM # 3 oil	-4.0		ASTM D471
Shore D, 100°C, 168 hr, in ASTM #1 Oil	2.0		ASTM D471
Shore D, 100 ℃, 168 hr, in ASTM # 3 oil	-4.0		ASTM D471
Shore D, 100 ℃, 336 hr, in ASTM # 1 oil	-1.0		ASTM D471
Shore D, 100 ℃, 336 hr, in ASTM # 3 oil	-4.0		ASTM D471
Shore D, 100 ℃, 504 hr, in ASTM # 1 oil	0.0		ASTM D471
Shore D, 100 ℃, 504 hr, in ASTM # 3 oil	-4.0		ASTM D471
The rate of change in Shore hardness			ISO 175
Shore D, 23 ℃, 70 hr, in reference fuel A (isooctane)	-1.0		ISO 175
Shore D, 23°C, 70 hr, in Reference Fuel C	-6.0		ISO 175
Shore D, 23 ℃, 168 hr, in reference fuel A (isooctane)	-1.0		ISO 175
Shore D, 23 ℃, 168 hr, in reference fuel	-5.0		ISO 175
Shore D, 23 ℃, 336 hr, in reference fuel A (isooctane)	0.0		ISO 175
Shore D, 23 ℃, 336 hr, in reference fuel C	-7.0		ISO 175
Shore D, 23 ℃, 504 hr, in reference fuel A (isooctane)	-1.0		ISO 175
Shore D, 23 ℃, 504 hr, in reference fuel C	-6.0		ISO 175
Shore D, 100°C, 70 hr, in ASTM #1 Oil	-1.0		ISO 175
Shore D, 100 ℃, 70 hr, in ASTM # 3 oil	-4.0		ISO 175
Shore D, 100°C, 168 hr, in ASTM #1 Oil	2.0		ISO 175
Shore D, 100 ℃, 168 hr, in ASTM # 3 oil	-4.0		ISO 175
Shore D, 100 ℃, 336 hr, in ASTM # 1 oil	-1.0		ISO 175
Shore D, 100 ℃, 336 hr, in ASTM # 3 oil	-4.0		ISO 175
Shore D, 100 ℃, 504 hr, in ASTM # 1 oil	0.0		ISO 175
Shore D, 100 ℃, 504 hr, in ASTM # 3 oil	-4.0		ISO 175
Volume change			ASTM D471
23℃，70 hr，in Reference Fuel A	1.0	%	ASTM D471
23 ℃, 70 hr, methanol	30	%	ASTM D471
23℃，168 hr，in Reference Fuel A	2.0	%	ASTM D471
23 ℃, 168 hr, methanol	32	%	ASTM D471
23℃，336 hr，in Reference Fuel A	3.0	%	ASTM D471
23℃，336 hr，in Reference Fuel C	33	%	ASTM D471
23℃，504 hr，in Reference Fuel A	3.0	%	ASTM D471
23℃，504 hr，in Reference Fuel C	31	%	ASTM D471
100 ℃, 70 hr, in ASTM # 1 oil	1.0	%	ASTM D471
100 ℃, 70 hr, in ASTM # 3 oil	12	%	ASTM D471
100℃，168 hr，in ASTM #1 Oil	-1.0	%	ASTM D471
100℃，168 hr，in ASTM #3 Oil	13	%	ASTM D471
100℃，336 hr，in ASTM #1 Oil	0.0	%	ASTM D471
100℃，336 hr，in ASTM #3 Oil	17	%	ASTM D471
100℃，504 hr，in ASTM #1 Oil	0.0	%	ASTM D471
100℃，504 hr，in ASTM #3 Oil	16	%	ASTM D471
Volume change			ISO 175
23℃，70 hr，in Reference Fuel A	1.0	%	ISO 175
23 ℃, 70 hr, methanol	30	%	ISO 175
23℃，168 hr，in Reference Fuel A	2.0	%	ISO 175
23 ℃, 168 hr, methanol	32	%	ISO 175
23℃，336 hr，in Reference Fuel A	3.0	%	ISO 175
23℃，336 hr，in Reference Fuel C	33	%	ISO 175
23℃，504 hr，in Reference Fuel A	3.0	%	ISO 175
23℃，504 hr，in Reference Fuel C	31	%	ISO 175
100 ℃, 70 hr, in ASTM # 1 oil	1.0	%	ISO 175
100 ℃, 70 hr, in ASTM # 3 oil	12	%	ISO 175
100℃，168 hr，in ASTM #1 Oil	-1.0	%	ISO 175
100℃，168 hr，in ASTM #3 Oil	13	%	ISO 175
100℃，336 hr，in ASTM #1 Oil	0.0	%	ISO 175
100℃，336 hr，in ASTM #3 Oil	17	%	ISO 175
100℃，504 hr，in ASTM #1 Oil	0.0	%	ISO 175
100℃，504 hr，in ASTM #3 Oil	16	%	ISO 175

Supplementary information	Nominal value	Unit	Test method
Compression load			ASTM D575
10% deflection	3.79	MPa	ASTM D575
15% deflection	5.34	MPa	ASTM D575
2% deflection	0.896	MPa	ASTM D575
20% deflection	6.89	MPa	ASTM D575
25% deflection	8.38	MPa	ASTM D575
5% deflection	2.10	MPa	ASTM D575
50% deflection	21.5	MPa	ASTM D575

Process Conditions
injection	Nominal value	Unit	Test method
Extrusion	Nominal value	Unit	Test method
Drying temperature – hot air dryer	100 to 110	°C
Drying time – hot air dryer	2.0	hr
Recommended maximum moisture content	< 0.030	%
Recommended injection volume	40 to 80	%
Proposed maximum recycled material ratio	20	%
Barrel rear temperature	180 to 200	°C
Barrel middle temperature	180 to 205	°C
Barrel front temperature	180 to 210	°C
Nozzle temperature	185 to 210	°C
Processing (melt) temperature	195 to 205	°C
Mold temperature	15 to 40	°C
Injection pressure	41.4 to 103	MPa
Injection speed	Slow-Moderate
Back pressure	< 1.38	MPa
Screw speed	40 to 80	rpm
Clamping force	4.1 to 6.9	kN/cm²
Cushion	< 3.18	mm
Screw length to diameter ratio	24.0:1.0
Screw compression ratio	3.0:1.0
Drying temperature	100 to 110	°C
Drying time	2.0	hr
Barrel 1 zone temperature	180 to 200	°C
Barrel 3 zone temperature	180 to 205	°C
Barrel 5 zone temperature	180 to 210	°C
Connector temperature	180 to 210	°C
Melt temperature	190 to 205	°C
Nozzle temperature	185 to 210	°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. Die C
3. Post-cured 16 hr at 230°F
4. Rate A (50°C/h)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.