3M™ Dyneon™ Fluoroplastic PVDF 6108/0001

About
Polyvinylidene Fluoride (PVDF) is ideal for multiple applications across a wide array of industries. Widely used in the chemical process industry, wire and cable industry, semiconductor industry, and oil and gas industry, PVDF is also gaining recognition in automotive, building, electronics, food processing, pharmaceutical and batteries. 3M™ Dyneon™ PVDF 6108/0001 is easily processed under a variety of conventional thermoplastic conversion techniques, being particularly suitable for injection molding. This grade is designed for parts that require shrinkage rates of 2-3%. PVDF 6108/0001 is inherently pure and chemically resistant against a variety of aggressive fluids and solvents. PVDF 6108/0001 exhibits excellent dimensional stability, abrasion resistance and high strength, and maintains its mechanical properties at elevated temperature. Features and Benefits High temperature capability Excellent chemical resistance to a variety of aggressive fluids and solvents Good permeation resistance Smooth, anti-fouling surfaces Injection molding grade Low shrinkage rates Excellent strength and dimensional stability Good color stability&&

About

Polyvinylidene Fluoride (PVDF) is ideal for multiple applications across a wide array of industries. Widely used in the chemical process industry, wire and cable industry, semiconductor industry, and oil and gas industry, PVDF is also gaining recognition in automotive, building, electronics, food processing, pharmaceutical and batteries. 3M™ Dyneon™ PVDF 6108/0001 is easily processed under a variety of conventional thermoplastic conversion techniques, being particularly suitable for injection molding. This grade is designed for parts that require shrinkage rates of 2-3%. PVDF 6108/0001 is inherently pure and chemically resistant against a variety of aggressive fluids and solvents. PVDF 6108/0001 exhibits excellent dimensional stability, abrasion resistance and high strength, and maintains its mechanical properties at elevated temperature. Features and Benefits High temperature capability Excellent chemical resistance to a variety of aggressive fluids and solvents Good permeation resistance Smooth, anti-fouling surfaces Injection molding grade Low shrinkage rates Excellent strength and dimensional stability Good color stability&&

Product Description
Generic	PVDF
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,High purity,Good Dimensional Stability,Low contractility,Good color stability,High Heat Resistance,Good wear resistance,Solvent resistance
Availabilitys	North America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.78	g/cm³	ISO 1183
Melt Flow Rate
230℃，2.16kg	8.0	g/10min
230℃，5.0kg	24	g/10min
Shrinkage rate
MD	2.0	%
Water absorption rate
23℃，24hr	< 0.040	%	ISO 62

MECHANICAL	Nominal value	Unit	Test method
tensile strength
Yield, 23 ℃	50.0	MPa
Fracture, 23 ℃	40.0	MPa
Tensile strain
Yield, 23 ℃	8.0	%
Fracture, 23 ℃	35	%
Bending modulus
23℃	1930	MPa	ASTM D790

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, annealed, 4.0 mm	112	℃	ASTM D648
Melting peak temperature	169	℃	ASTM D3418

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index
3.0 mm	44	%	ASTM D2863

Notes
1. Typical properties: these are not to be construed as specifications.
2. 2.0 in/min
3. 0.079 in/min
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.