Lutene® XL2808BK

About
Applications Cross-linkable semi-conductive compound for conductor and bonded insulation shielding of medium voltage power cables with rated voltage up to 35kV Description LUTENE ® XL2808BK has an excellent electrical properties and assists in obtaining a minimum shrinkback on aluminum conductor, especially solid conductor. LUTENE ® XL2808BK is specifically developed to provide a smooth surface yielding a more perfect interface between the extruded shield and the insulation. LUTENE ® XL2808BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper conductor. Characteristics Excellent Electrical Property Excellent Physical and Thermal Property Excellent Surface Smoothness Specification LUTENE ® XL2808BK meets the property requirement of the following material specifications. AEIC CS8 ICEA S-94-649 IEC 60502 BS 6622&&

About

Applications Cross-linkable semi-conductive compound for conductor and bonded insulation shielding of medium voltage power cables with rated voltage up to 35kV Description LUTENE ® XL2808BK has an excellent electrical properties and assists in obtaining a minimum shrinkback on aluminum conductor, especially solid conductor. LUTENE ® XL2808BK is specifically developed to provide a smooth surface yielding a more perfect interface between the extruded shield and the insulation. LUTENE ® XL2808BK has stable volume resistivity characteristics at elevated temperatures and is formulated with a polymer system that has demonstrated compatibility with copper conductor. Characteristics Excellent Electrical Property Excellent Physical and Thermal Property Excellent Surface Smoothness Specification LUTENE ® XL2808BK meets the property requirement of the following material specifications. AEIC CS8 ICEA S-94-649 IEC 60502 BS 6622&&

Product Description
Supplier	LG Chemical
Generic	XLPE
Material Status	Commercial: Active
Features	Good surface appearance,Conductive,Good Electrical Properties,Crosslinked
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.14	g/cm³	ASTM D1505
water content	< 1000	ppm	Karl Fisher

MECHANICAL	Nominal value	Unit	Test method
tensile strength	> 12.5	MPa	ASTM D638
Tensile strain
fracture	> 200	%	ASTM D638

Aging performance	Nominal value	Unit	Test method
The rate of change in tensile strength
135℃，168 hr	< 15	%	ASTM D471
Change rate of ultimate elongation
135℃，168 hr	< 15	%	ASTM D471

THERMAL	Nominal value	Unit	Test method
Embrittlement temperature	-25.0	℃	ASTM D746

Electrical performance	Nominal value	Unit
Volume resistivity
23℃	< 1.0E+2	ohms·cm
90 ℃	< 1.0E+3	ohms·cm

Notes
1. Typical properties: these are not to be construed as specifications.
2. 23°C
3. 7.9 in/min
4. No Crack
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.