NORDEL™ IP 3720P

About
NORDEL™ IP 3720P Hydrocarbon Rubber is a semi-crystalline, very low diene-containing ethylene-propylene-diene terpolymer (EPDM) and has a low viscosity for excellent processing characteristics and low unsaturation for stability during long term exposures to heat and ultraviolet (UV) light. It is designed for extrusion and molding processes in low and medium extension compounds and can be peroxide cured. In addition, this polymer can be used for modification of thermoplastic materials such as polyethylene or polypropylene. Main Characteristics: Semi-crystalline Very low diene Low molecular weight Heat and UV stable Complies with U.S. FDA 21 CFR 177.2600, U.S. FDA 21 CFR 175.105 (Adhesives only). Consult the regulations for complete details. Applications: Plastics modification such as polyethylene or polypropylene Peroxide cured, heat resistant moldings&&

About

NORDEL™ IP 3720P Hydrocarbon Rubber is a semi-crystalline, very low diene-containing ethylene-propylene-diene terpolymer (EPDM) and has a low viscosity for excellent processing characteristics and low unsaturation for stability during long term exposures to heat and ultraviolet (UV) light. It is designed for extrusion and molding processes in low and medium extension compounds and can be peroxide cured. In addition, this polymer can be used for modification of thermoplastic materials such as polyethylene or polypropylene. Main Characteristics: Semi-crystalline Very low diene Low molecular weight Heat and UV stable Complies with U.S. FDA 21 CFR 177.2600, U.S. FDA 21 CFR 175.105 (Adhesives only). Consult the regulations for complete details. Applications: Plastics modification such as polyethylene or polypropylene Peroxide cured, heat resistant moldings&&

Product Description
Supplier	DOW
Generic	EPDM+SEBS
Material Status	Commercial: Active
Features	Weather resistance is good
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.880	g/cm³	ASTM D297
Mooney viscosity
ML 1+4，125℃	20	MU	ASTM D1646
Ethylene composition	69.0	wt%	ASTM D3900
Ethylidene norbornene content	0.5	wt%	ASTM D6047
Ash Content	< 0.1	%	ASTM D5667
molecular weight distribution	Medium		Internal Method
Propylene content	30.5	wt%	ASTM D3900
Residual Transition Metal	< 10	ppm	Internal Method
Volatiles	< 0.40	wt%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.