Styropek® BFL 495

About
Styropek® BFL products can be used in a wide variety of applications, including blocks for panels, general insulation, below grade use, fabrication, flotation, and general packaging. Additional applications include ICF’s (“insulated concrete forms”), thin or thick walled custom molding, and other general protective packaging. Modified expandable polystyrene (EPS) / non-flammable / antiflame / auto-extinguishable containing approximately 3.45 – 3.65 wt% pentane as the blowing agent. All products are supplied as spherical beads with a bulk density of approximately 40 lb/ft³ (640 kg/m³). Styropek® BFL products are compatible with many anti-stat, mineral oil and color additives that can be added during processing. Styropek® BFL products do not contain chlorofluorocarbons and hydrofluorocarbons compounds. Intended uses Shape molding for thin walled applications with fast cycles and excellent surface finish requiring modified material.&&

About

Styropek® BFL products can be used in a wide variety of applications, including blocks for panels, general insulation, below grade use, fabrication, flotation, and general packaging. Additional applications include ICF’s (“insulated concrete forms”), thin or thick walled custom molding, and other general protective packaging. Modified expandable polystyrene (EPS) / non-flammable / antiflame / auto-extinguishable containing approximately 3.45 – 3.65 wt% pentane as the blowing agent. All products are supplied as spherical beads with a bulk density of approximately 40 lb/ft³ (640 kg/m³). Styropek® BFL products are compatible with many anti-stat, mineral oil and color additives that can be added during processing. Styropek® BFL products do not contain chlorofluorocarbons and hydrofluorocarbons compounds. Intended uses Shape molding for thin walled applications with fast cycles and excellent surface finish requiring modified material.&&

Product Description
Generic	PS (EPS)
Material Status	Commercial: Active
Features	Renewable resources,Foaming performance,Flame Characteristics,Self-extinguishing
Availabilitys	North America,Latin America

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.64	g/cm³

Supplementary information	Nominal value	Unit
Bead diameter
< 425.0 µm	< 2.0	%
425.0 to 850.0 µ m	> 97	%
	20.0 to 65.0	kg/m³
	< 1000	ppm

Notes
1. Pentane
2. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.