| About |
|---|
| CALIBRE™ 701-15 Series resins are formulated and produced to supply both clarity and enhanced ignition resistance. They do so while maintaining excellent physical properties and processability. The CALIBRE 701-15 series products are available in 2 additive packages: CALIBRE 701: Mold release. CALIBRE 703: Mold release and UV stabilizer. Main Characteristics Underwriters Laboratory Inc. (UL) Applications: Industrial switches Circuit breakers Plugs, socket and switches Street lights Safety lights Reflectors&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | Polycarbonate |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Good Clarity,Flame Characteristics,V-2,V-0 |
| Availabilitys | North America,Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.20 | g/cm³ | ISO 1183/A |
| Density | 1.2 | g/cm³ | ISO 1183-2 |
| Melt Flow Rate | |||
| 300℃，1.20kg | 15 | g/10min | ISO 1133 |
| Melt Volume Rate | |||
| 300℃，1.2 kg | 12.0 | cm³/10min | ISO 1133 |
| Shrinkage rate | |||
| MD | 0.50 to 0.70 | % | ISO 294-4 |
| Water absorption rate | |||
| saturated | 0.030 | % | ISO 62-2 |
| balance | 0.23 | % | ISO 62-2 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2300 | MPa | ISO 527-2/50 |
| Tensile modulus | 2300 | MPa | ISO 527-2 2 |
| tensile strength | |||
| fracture | 66.0 | MPa | ISO 527-2/50 |
| yield | 60.0 | MPa | ISO 527-2/50 |
| yield | 60.0 | MPa | ISO 527-2 2 |
| Tensile strain | |||
| fracture | 120 | % | ISO 527-2/50 |
| yield | 6.0 | % | ISO 527-2 2 |
| yield | 6.0 | % | ISO 527-2/50 |
| Nominal strain at break | > 50 | % | ISO 527-2 2 |
| Bending modulus | 2400 | MPa | ISO 178 |
| bending strength | 100 | MPa | ISO 178 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 20 | kJ/m² | ISO 179/1eA |
| 23℃ | 17.0 | kJ/m² | ISO 179/1eA 2 |
| -30℃ | 15.0 | kJ/m² | ISO 179/1eA 2 |
| Charpy impact strength | |||
| 23℃ | No Break | ISO 179/1eU 2 | |
| -30℃ | No Break | ISO 179/1eU 2 | |
| Impact strength of cantilever beam notch | |||
| 23℃ | 83 | kJ/m² | ISO 180-A |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, annealed | 139 | ℃ | ISO 75-2/A |
| 1.8 MPa, unannealed | 122 | ℃ | ISO 75-2/A |
| 1.8 MPa | 122 | ℃ | ISO 75-2 2 |
| 0.45 MPa, annealed | 142 | ℃ | ISO 75-2/B |
| 0.45 MPa | 140 | ℃ | ISO 75-2 2 |
| Vicat Softening Temp | |||
| B50 | 147 | ℃ | ISO 306 |
| B50 | 147 | ℃ | ISO 306 2 |
| Ball pressure temperature | 125 | ℃ | IEC 60335-1 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Compared to the leakage tracing index | |||
| 2.00 mm, solution A | 250 | V | IEC 60112 |
| Compared to the leakage tracing index | |||
| CTI | 250 | IEC 60112 2 |
| FLAME CHARACTERISTICS | Nominal value | Unit | Test method |
|---|---|---|---|
| Flame retardant level | UL 94 | ||
| 1.60 mm | V-2 | UL 94 | |
| 3.20 mm | V-0 | UL 94 | |
| Flame retardant level | |||
| 1.60 mm | V-2 | ISO 1210 2 | |
| Flame retardant level | |||
| 3.20 mm | V-0 | ISO 1210 2 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3. 0.079 in/min |
| 4. 3-points |
| 5. This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |