| About |
|---|
| Solef® 60512/0550 and Solef® 60512/0150 are PVDF grades compounded with PTFE for extrusion of anti-wear tapes.&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PVDF |
| Material Status | Commercial: Active |
| Features | Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.80 to 1.82 | g/cm³ | ISO 1183 |
| Melt Flow Rate | |||
| 230℃，10.0kg | 2.0 to 4.5 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| 23℃，24hr | < 0.040 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | |||
| 23℃，1.50 mm | 1100 to 1350 | MPa | ASTM D638 |
| tensile strength | |||
| Fracture, 23 ℃, 1.50 mm | 30.0 to 40.0 | MPa | ASTM D638 |
| Yield, 23 ℃, 1.50 mm | 30.0 to 40.0 | MPa | ASTM D638 |
| Tensile strain | |||
| Fracture, 23 ℃, 1.50 mm | 50 to 300 | % | ASTM D638 |
| Yield, 23 ℃, 1.50 mm | 8.0 to 12 | % | ASTM D638 |
| friction coefficient | ASTM D1894 | ||
| With oneself – dynamic | 0.10 to 0.20 | ASTM D1894 | |
| With oneself – static | 0.050 to 0.20 | ASTM D1894 | |
| Taber abraser | |||
| 1000 cycles, 1000 g, CS-10 wheels | 5.00 to 10.0 | mg | ASTM D4060 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 170 to 174 | ℃ | ASTM D3418 |
| Crystallization peak temperature | |||
| DSC | 144 to 148 | ℃ | ASTM D3418 |
| Crystallization heat | 38.0 to 48.0 | J/g | ASTM D3417 |
| Heat of Fusion（80℃ to end of melting） | 41.0 to 50.0 | J/g | ASTM D3417 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Type V, 0.039 in/min |
| 3. Type V, 2.0 in/min |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |