| About |
|---|
| Product Description | |
|---|---|
| Supplier | Hersbit |
| Generic | TPE |
| Material Status | Commercial: Active |
| Features | High impact resistance,High liquidity,Good Hardness |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| hardness | |||
| Shaw’s A | 65 | ASTM D2240 | |
| Density | 0.88 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 4.9 | MPa | ASTM D412 |
| Tensile modulus | |||
| 100% strain | 1.6 | MPa | ASTM D412 |
| 300% strain | 2.4 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 700 | % | ASTM D412 |
| Process Conditions | |||
|---|---|---|---|
| Injection molding process | Nominal value | Unit | Test method |
| Temperature of the rear section of the screw | 180-200 | ℃ | |
| Temperature of the front section of the screw | 200-220 | ℃ | |
| Nozzle temperature | 210-240 | ℃ | |
| Maximum melting temperature | 260 | ℃ | |
| Pressure | 中-高压 | ||
| speed | 中-高速 | ||
| Mold temperature | 10-60 | ℃ | |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |