| About |
|---|
| Characteristics: Polyether resin of medium to high hardness, excellent temperature and hydrolysis resistance. Applications: For the midsole.&& |
| Product Description | |
|---|---|
| Supplier | Huafon |
| Generic | PUR-醚 |
| Material Status | Commercial: Active |
| Features | Hydrolysis stability |
| Availabilitys | Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.480 to 0.500 | g/cm³ | |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Asker A：23℃ | 42.0 to 45.0 | ||
| Asker C：23℃ | 62.0 to 66.0 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermosetting components | |||
| Component A | 按重量计算的混合比: 100 | ||
| Component B | 按重量计算的混合比: 76 to 78 |
| Uncured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| colour | Clear/Transparent | ||
| Density | |||
| 40℃ | 1.00 to 1.02 | g/cm³ | |
| 40℃ | 1.12 to 1.14 | g/cm³ | |
| viscosity | |||
| 40℃ | 0.20 to 0.60 | Pa·s | |
| 40℃ | 0.40 to 0.70 | Pa·s |
| Cured Properties | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | > 2.80 | MPa | |
| Tensile strain | |||
| fracture | > 300 | % | |
| Compression deformation | |||
| 23℃，24 hr | < 15 | % | |
| tear strength | > 15.0 | kN/m |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Product Density |
| 3. Part B |
| 4. Part A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |