Uz-Kor HDPE FL7000

About
FL7000 – is manufactured to be processed in conventional blown film equipment by CSTR Slurry technology. Thanks to Bi-modal design of molecular composition, FL7000 offers both excellent processability and superior mechanical properties. Application Shopping bag, Garbage Bag. (Industrial/General Packing film)&&

Product Description
Generic	HDPE
Material Status	Commercial: Active
Features	Excellent Processability,High density,Bimodal molecular weight distribution
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.954 to 0.957	g/cm³	ASTM D1505
Melt Flow Rate
190℃，2.16kg	0.027 to 0.047	g/10min	ASTM D1238
ESCR(Environmental Stress Cracking Resistance)
F50	> 1000	hr	ASTM D1693

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	200	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	> 120	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	> 50		ASTM D785
tensile strength
yield	> 20.6	MPa
fracture	> 29.4	MPa
Tensile strain
fracture	> 500	%	ASTM D638
Bending modulus	> 981	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.