Ketjenflex® 4

About
KETJENFLEX® 4 is a benzene sulfonamide based plasticizer used in Polyamide (co)polymers. Description and Application KETJENFLEX® 4 is used as a plasticizer in various polyamide plastic formulations. At dosage levels from 8 to 15% KETJENFLEX® 4 readily plasticizes: Polyamide 6 Polyamide 6,6 Polyamide 11 Polyamide 12 Copolymers of polyamide with either polyether, polyurethane and polyester With its high boiling point of 314°C KETJENFLEX® 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Articles produced of Polyamide/KETJENFLEX® 4 mixtures show good gas barrier properties and low liquid impregnation. KETJENFLEX® 4 will show a minimum of extrudation during lifetime of the manufactured part. Applications include: Air Brake tubing Hydraulic tubing Vacuum tubing Lubrication hoses A/C hoses Filaments&&

About

KETJENFLEX® 4 is a benzene sulfonamide based plasticizer used in Polyamide (co)polymers. Description and Application KETJENFLEX® 4 is used as a plasticizer in various polyamide plastic formulations. At dosage levels from 8 to 15% KETJENFLEX® 4 readily plasticizes: Polyamide 6 Polyamide 6,6 Polyamide 11 Polyamide 12 Copolymers of polyamide with either polyether, polyurethane and polyester With its high boiling point of 314°C KETJENFLEX® 4 can be injected during the hot compounding process of polyamide without generating fumes or deposits in the vacuum hoses. Articles produced of Polyamide/KETJENFLEX® 4 mixtures show good gas barrier properties and low liquid impregnation. KETJENFLEX® 4 will show a minimum of extrudation during lifetime of the manufactured part. Applications include: Air Brake tubing Hydraulic tubing Vacuum tubing Lubrication hoses A/C hoses Filaments&&

Product Description
Generic	OTSA增塑剂
Material Status	Commercial: Active
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
THERMAL	Nominal value	Unit	Test method
Additive concentration	> 99	%
State at Room Temperature	Liquid
Boiling Temperature	314	℃
chemical properties	Benzene Sulfonamide

PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.