LARIPUR® LPR 5260

About
SERIES 60 AND 2103 ETHER Products based on quality polyether. ln comparison with the Ester Series, they show a better resistance to hydrolysis and microbiological attack, a very good cold flexibility but a lower resistance to oxidation.&&

Product Description
Generic	TPU-醚
Material Status	Commercial: Active
Features	Weather resistance is good,Low temperature toughness,Good wear resistance,Solvent resistance
Availabilitys	North America,Latin America,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.15	g/cm³	ASTM D792

elastic body	Nominal value	Unit	Test method
tensile strength			ASTM D412
fracture	56.1	MPa	ASTM D412
50% strain	10.6	MPa	ASTM D412
100% strain	13.0	MPa	ASTM D412
300% strain	29.2	MPa	ASTM D412
Tensile strain
fracture	490	%	ASTM D412
tear strength	127	kN/m	ASTM D624
Compression deformation			ASTM D395
23℃，70 hr	27	%	ASTM D395
70℃，22 hr	50	%	ASTM D395

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	120	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Shore hardness
Shaw’s D	50		ASTM D2240
Bending modulus	96.0	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.