| About |
|---|
| Catalyst Masterbatch component for PolyOne’s Syncure™ system, which is a two-step, silane-grafted, moisture-crosslinkable polyethylene system.&& |
| Product Description | |
|---|---|
| Supplier | Polyone |
| Generic | XLPE |
| Material Status | Commercial: Active |
| Features | Flame Characteristics |
| Availabilitys | Africa & Middle East ,North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 2.25 | g/cm³ | ASTM D792 |
| Apparent density | 1.26 | g/cm³ | Internal Method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 3.4 | g/10min | ASTM D1238 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 71 | °C | |
| Drying time | 3.0 to 4.0 | hr | |
| Barrel rear temperature | 204 to 216 | °C | |
| Barrel middle temperature | 171 to 204 | °C | |
| Barrel front temperature | 177 to 204 | °C | |
| Nozzle temperature | 177 to 216 | °C | |
| Mold temperature | 27 to 66 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Geon® 1169 |
| 3. Procedure A |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |