| About |
|---|
| Amodel® A-1565 HS is a 65% glass and mineral-reinforced polyphthalamide (PPA) designed to be cost-effective in applications requiring high stiffness, good dimensional stability and good retention of stiffness at elevated temperatures. This grades also exhibits a high deflection temperature and flexural modulus. Black: A-1565 HS BK 324&& |
| Product Description | |
|---|---|
| Supplier | Solvay |
| Generic | PPA |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Low CLTE,Low warping,Good flexibility,Good Dimensional Stability,High Heat Resistance,Lubricating,Solvent resistance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.90 | g/cm³ | ISO 1183/A |
| Shrinkage rate | |||
| TD | 0.50 | % | ASTM D955 |
| MD | 0.30 | % | ASTM D955 |
| Water absorption rate | |||
| 24hr | 0.10 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 20700 | MPa | ASTM D638 |
| Tensile modulus | ISO 527-2 | ||
| 23℃ | 19700 | MPa | ISO 527-2 |
| 100℃ | 15400 | MPa | ISO 527-2 |
| 150℃ | 5720 | MPa | ISO 527-2 |
| 175℃ | 5100 | MPa | ISO 527-2 |
| tensile strength | 131 | MPa | ASTM D638 |
| tensile strength | ISO 527-2 | ||
| Fracture, 23 ℃ | 138 | MPa | ISO 527-2 |
| Fracture, 24 ℃ | 91.7 | MPa | ISO 527-2 |
| Fracture, 150 ℃ | 46.2 | MPa | ISO 527-2 |
| Fracture, 175 ℃ | 32.4 | MPa | ISO 527-2 |
| Tensile strain | ISO 527-2 | ||
| fracture | 1.2 | % | ASTM D638 |
| Fracture, 23 ℃ | 1.0 | % | ISO 527-2 |
| Fracture, 24 ℃ | 1.3 | % | ISO 527-2 |
| Fracture, 150 ℃ | 2.4 | % | ISO 527-2 |
| Fracture, 175 ℃ | 1.8 | % | ISO 527-2 |
| Bending modulus | 17900 | MPa | ASTM D790 |
| Bending modulus | ISO 178 | ||
| 23℃ | 9100 | MPa | ISO 178 |
| 100℃ | 6830 | MPa | ISO 178 |
| 150℃ | 2480 | MPa | ISO 178 |
| 175℃ | 2280 | MPa | ISO 178 |
| bending strength | 210 | MPa | ASTM D790 |
| bending strength | ISO 178 | ||
| 23℃ | 211 | MPa | ISO 178 |
| 100℃ | 163 | MPa | ISO 178 |
| 150℃ | 69.6 | MPa | ISO 178 |
| 175℃ | 55.8 | MPa | ISO 178 |
| compressive strength | |||
| 13.0 mm | 189 | MPa | ASTM D695 |
| shear strength | 71.0 | MPa | ASTM D732 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 3.4 | kJ/m² | ISO 179/1eA |
| Charpy Unnotch Impact strength | |||
| 23℃ | 44 | kJ/m² | ISO 179/1eU |
| Impact strength of cantilever beam notch | 37 | J/m | ASTM D256 |
| 23℃ | 4.0 | kJ/m² | ISO 180-1A |
| Impact strength of cantilever beam notch | 410 | J/m | ASTM D256 |
| Notched impact strength of cantilever beam | |||
| 23℃ | 32 | kJ/m² | ISO 180/1U |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed | 271 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 271 | ℃ | ISO 75-2/A |
| Melting peak temperature | 311 | ℃ | ASTM D3418 |
| Melting temperature | 311 | ℃ | ISO 11357-3 |
| Linear coefficient of thermal expansion | |||
| TD | ASTM E831 | ||
| MD | ASTM E831 | ||
| 0 to 100 ℃ | 2.0E-5 | cm/cm/℃ | ASTM E831 |
| 100 to 200 ℃ | 1.7E-5 | cm/cm/℃ | ASTM E831 |
| 0 to 100 ℃ | 3.7E-5 | cm/cm/℃ | ASTM E831 |
| 100 to 200 ℃ | 8.1E-5 | cm/cm/℃ | ASTM E831 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Volume resistivity | 4.0E+14 | ohms·cm | ASTM D257 |
| Arc resistance | 125 | sec | ASTM D495 |
| Compared to the leakage tracing index | 600 | V | UL 746 |
| Process Conditions | |||
|---|---|---|---|
| injection | Nominal value | Unit | Test method |
| Drying temperature | 120 | °C | |
| Drying time | 4.0 | hr | |
| Recommended maximum moisture content | 0.045 | % | |
| Hopper temperature | 79 | °C | |
| Barrel rear temperature | 304 to 318 | °C | |
| Barrel front temperature | 316 to 329 | °C | |
| Processing (melt) temperature | 321 to 343 | °C | |
| Mold temperature | 135 | °C | |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |