| About |
|---|
| This high density polyethylene is an ethylene-hexene copolymer that is tailored for injection molded applications that: Require moderate flow Require excellent impact strength Require good stiffness Are durable and recyclable for sustainability Typical injection molded applications for 9006 include: Industrial pails (five-gallon) Pail lids Automotive applications Foamed parts This resin meets these specifications: ASTM D4976 – PE 233 FDA 21 CFR 177.1520(c) 3.2a, use conditions B through H per 21 CFR 176.170(c)&& |
| Product Description | |
|---|---|
| Generic | HDPE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,High impact resistance,Renewable resources,Food contact compliance,Moderate liquidity,Durability,Hexene copolymers |
| Availabilitys | North America,Latin America,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.953 | g/cm³ | ASTM D1505 |
| Apparent bulk density | 0.590 | g/cm³ | ASTM D1895 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 6.6 | g/10min | ASTM D1238 |
| High load melt index | 171.6 | g/10min | ASTM D1238 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | 26.9 | MPa | ASTM D638 |
| Bending modulus | 1030 | MPa | ASTM D790 |
| Bending modulus | 1280 | MPa | ASTM D790 |
| Tensile strain | |||
| fracture | 900 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | |||
| 125 | ℃ | ASTM D1525 | |
| Embrittlement temperature | <= -71.0 | ℃ | ASTM D746 |
| Linear coefficient of thermal expansion |
| Notes |
|---|
| 1. use conditions B through H |
| 2. Typical properties: these are not to be construed as specifications. |
| 3. Type IV, 2.0 in/min |
| 4. 0.50 in/min |
| 5. Rate A (50°C/h), Loading 1 (10 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |