| About |
|---|
| Kraton G1701 M is a clear, linear diblock copolymer based on styrene and ethylene/propylene with a polystyrene content of 37%. It is supplied from North America in the physical form identified below. Kraton G1701 MU – supplied as a powder. Kraton G1701 M is used as a modifier of bitumen and polymers. It is also suitable as an ingredient in formulating compounds for footwear applications and may be used in formulating adhesives, sealants, and coatings.&& |
| Product Description | |
|---|---|
| Generic | SEPS |
| Material Status | Commercial: Active |
| Features | Inoxidizability,Copolymer |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.920 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 230℃，5.0kg | 1.0 | g/10min | ASTM D1238 |
| Antioxidant Additive | 0.0 to 0.2 | wt% | Internal Method |
| Polystyrene content | 35 to 39 | % | Internal Method |
| Total Extractables | < 3.0 | % | Internal Method |
| Volatiles | < 1.0 | % | Internal Method |
| viscosity | |||
| 100℃ | 15.0 to 19.0 | cSt | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shore A, 10 seconds | 64 | ASTM D2240 |
| elastic body | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | |||
| yield | 2.07 | MPa | ASTM D412 |
| Tensile strain | |||
| fracture | 100 | % | ASTM D412 |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Diblock Content | 100 | % | |
| Styrene/Rubber ratio | 37/63 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Measured on the polymer before hydrogenation. |
| 3. Kinematic Viscosity, 1.7%w (ENJ404@100C) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |