| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABIC |
| Generic | Polycarbonate |
| Material Status | Commercial: Negative |
| Features | Heat Resistance, Good |
| Availabilitys | North America,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| MECHANICAL | Nominal value | Unit | Test method |
| tensile strength | |||
| yield | 62 | MPa | ISO 527 |
| maximum | 65 | MPa | ISO 527 |
| Tensile modulus | 2506 | MPa | ISO 527 |
| Tensile strain | |||
| fracture | 100-154 | % | ISO 527 |
| Drop hammer impact | |||
| 0.03，0.75 mm | 23 | J | ISO 6603-1 |
| tear strength | |||
| Initiation | 245 | kN/m | |
| Propogation | 10-20 | kN/m | |
| Anti puncture performance | 12 | J | |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Thermal conductivity coefficient | 0.2 | W/m/K | ISO 11359 |
| Linear coefficient of thermal expansion | 5.8E-5 | /℃ | ISO 11359 |
| specific heat | |||
| 4℃ | 1.25 | KJ/Kg-℃ | ISO 11359 |
| Glass transition temperature | 153 | ℃ | ISO 11357 |
| Vicat Softening Temp | |||
| B | 175 | ℃ | |
| Hot deformation temperature | |||
| 1.8 MPa | 145 | ℃ | ISO 75 |
| Brittle temperature | -135 | ℃ |
| PHYSICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Density | 1.2 | g/cm³ | ISO 1183 |
| Water absorption rate | |||
| 24hr | 0.35 | % | ISO 62 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60° | 170 | ISO 2813 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |