TECHNYL® RED A 218HPS V50 BLACK 21N

About
TECHNYL® RED A 218HPS V50 BLACK 21N is a polyamide blend of polyamide 6.6 polyamide 6 reinforced with 50% of glass fiber, high heat stabilized for injection moulding. This grade is designed to offer a long term heat resistance and is suitable to work in environments characterized by a very high temperature. (210°C)&&

Product Description
Supplier	DOMO
Generic	PA66/6
Material Status	Commercial: Active
Features	Heat Stabilized,Good surface appearance,Good Rigidity
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.56	g/cm³
Shrinkage rate
TD	0.46	%
MD	0.30	%
Water absorption rate
23℃，24hr，2.00 mm	0.16	%
Equilibrium, 23 ℃, 50% RH	1.6	%

MECHANICAL	Nominal value	Unit
Tensile modulus
23℃	17500	MPa
tensile strength
Fracture, 23 ℃	238	MPa
Tensile strain
Fracture, 23 ℃	2.7	%
Bending modulus
23℃	14000	MPa
bending strength
23℃	368	MPa

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
-30℃	16	kJ/m²
23℃	17	kJ/m²
Charpy Unnotch Impact strength
-30℃	100	kJ/m²
23℃	97	kJ/m²
23℃	79	kJ/m²

THERMAL	Nominal value	Unit
Hot deformation temperature
0.45 MPa, unannealed	254	℃
1.8 MPa, unannealed	232	℃
Melting temperature	250	℃

Process Conditions
Injection	Nominal value	Unit	Test method
Injection instructions	Nominal value	Unit	Test method
drying temperature	80	°C
Recommended maximum moisture content	0.20	%
Temperature at the rear of the barrel	270 to 280	°C
Temperature in the middle of the barrel	280 to 290	°C
Front temperature of material barrel	280 to 300	°C
Mold temperature	70 to 100	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.