| About |
|---|
| Product Description | |
|---|---|
| Supplier | SABIC |
| Material Status | Commercial: Active |
| Features | Good Hermeticity |
| Availabilitys | North America,Europe,Africa & Middle East ,Asia Pacific |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt Flow Rate | |||
| 190℃，2.16kg | 1.0 | g/10min | ASTM D1238 |
| Density | |||
| 23℃ | 0.868 | g/cm³ | ASTM D792 |
| anti-block | – | – | Internal method |
| tensile property | Nominal value | Unit | Test method |
|---|---|---|---|
| Pressure breakthrough | 9.3 | MPa | ASTM D638 |
| 100% modulus | 2.9 | MPa | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| melting point | ~62 | ℃ | SABIC method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| tear strength | |||
| C-type | 39.2 | kN/m | ASTM D624 |
| Tensile strain | |||
| fracture | 850 | % | ASTM D638 |
| Bending modulus | |||
| 1% secant | 13.2 | MPa | ASTM D790 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |