| About |
|---|
| Pebax® 4033 SD 01是一种聚醚嵌段酰胺（PEBA-醚）产品,。 它可以通过挤出或注射成型进行加工,在北美洲、非洲和中东、拉丁美洲、欧洲或亚太地区有供货。 特性包括: 良好的抗紫外线能力 优良的脱模剂&& |
| Product Description | |
|---|---|
| Supplier | Arkema |
| Generic | PA12弹性体 |
| Material Status | Commercial: Active |
| Features | Weather resistance is good,Good stripping performance |
| Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.01 | g/cm³ | ASTM D792 |
| Melt Flow Rate | |||
| 235℃，1.0kg | 3.0 | g/10min | ASTM D1238 |
| Water absorption rate | |||
| saturated | 0.50 | % | ASTM D570 |
| 24hr | 1.2 | % | ASTM D570 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | ASTM D2240 | ||
| Shaw’s A | 90 | ASTM D2240 | |
| Shaw’s D | 40 | ASTM D2240 | |
| tensile strength | |||
| fracture | 36.0 | MPa | ASTM D638 |
| Tensile strain | |||
| fracture | 490 | % | ASTM D638 |
| Bending modulus | 75.2 | MPa | ASTM D790 |
| bending strength | |||
| yield | 4.30 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -40℃ | No Break | ASTM D256 | |
| 19℃ | No Break | ASTM D256 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Vicat Softening Temp | 132 | ℃ | ASTM D1525 |
| Melting temperature | 119 to 170 | ℃ | |
| Linear coefficient of thermal expansion | |||
| MD | 2.3E-4 | 1/℃ | ASTM D696 |
| Electrical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| Surface resistivity | 5.0E+10 | ohms | ASTM D257 |
| Volume resistivity | 7.0E+11 | ohms·cm | ASTM D257 |
| Dielectric constant | |||
| 1 kHz | 8.60 | ASTM D150 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |