About |
---|
UV 60-7180 is a one component, UV light curable, clear coating. 60-7180 is water clear and exhibits superior yellowing resistance. This product has been formulated to cure instantly when exposed to high intensity ultraviolet light. 60-7180 has excellent adhesion to a variety of substrates and is therefore suitable as an adhesive and coating candidate, or may be used in small potting applications. UV 60-7180 may also be used as a decorative ultra clear doming resin on labels, pins, key fobs, magnets, etc… Its high gloss finish and outstanding clarity will enhance any image it is applied over. Features: Water Clear One part Low Viscosity Cures in seconds 100% solids (no solvents) Low shrinkage&& |
Product Description | |
---|---|
Generic | SMMA |
Material Status | Commercial: Active |
Features | Good Clarity,Good surface appearance,Low Viscosity,Good bond,Fast Cure |
Availabilitys | Africa & Middle East ,North America,Latin America,Asia Pacific,Europe |
Technical Data | |||
---|---|---|---|
Uncured Properties | Nominal value | Unit | Test method |
colour | Clear/Transparent | ||
Solid content | 100 | % | |
Density | |||
25℃ | 1.10 | g/cm³ | |
viscosity | |||
25℃ | 0.80 | Pa·s | |
Storage period | 1 | month |
Cured Properties | Nominal value | Unit | Test method |
---|---|---|---|
Shore hardness | |||
Shaw’s D | 65 to 70 |
Notes |
---|
1. Typical properties: these are not to be construed as specifications. |
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |