Nucrel® AE - SOLIAO

About
Nucrel® AE is a terpolymer of ethylene, methacrylic acid, and acrylate. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment designed to process polyethylene resins. It can be used as a modifier for PE in blends of approximately 20 to 40% Nucrel® AE with 80 to 60% LDPE for enhancement of foil adhesion properties. The level of adhesion improvement depends on processing conditions. Foil-containing pouches and sachets for packaging non-aggressive food and miscellaneous non-food products. Snack structures Other foil, metallized film, or paper coatings as a heat seal or tie layer&&

About

Nucrel® AE is a terpolymer of ethylene, methacrylic acid, and acrylate. It is available for use in conventional extrusion coating, coextrusion coating and extrusion laminating equipment designed to process polyethylene resins. It can be used as a modifier for PE in blends of approximately 20 to 40% Nucrel® AE with 80 to 60% LDPE for enhancement of foil adhesion properties. The level of adhesion improvement depends on processing conditions. Foil-containing pouches and sachets for packaging non-aggressive food and miscellaneous non-food products. Snack structures Other foil, metallized film, or paper coatings as a heat seal or tie layer&&

Product Description
Supplier	DOW
Generic	EMAAA
Material Status	Commercial: Active
Features	Good bond
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.920	g/cm³	ASTM D792
Density	0.920	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	11	g/10min	ISO 1133
190℃，2.16kg	11	g/10min	ASTM D1238

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	79.0	℃	ASTM D1525
Vicat Softening Temp	79.0	℃	ISO 306
Melting peak temperature	105	℃	ASTM D3418
Melting temperature
DSC	105	℃	ISO 3146
freezing point	85	℃	ASTM D3418

Process Conditions
Extrusion	Nominal value	Unit	Test method
Barrel 1 zone temperature	185	°C
Barrel 2 zone temperature	235	°C
Barrel 3 zone temperature	285	°C
Barrel 4 zone temperature	310	°C
Barrel 5 zone temperature	310	°C
Connector temperature	310	°C
Melt temperature	< 335	°C
Nozzle temperature	310	°C

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.