| About |
|---|
| PULSE™ 2100LG Engineering Resin is designed to provide top performance in tough applications, from single piece items to intricate components. Ideal for energy management solutions, it can withstand high and low temperature extremes and rapid, repeated temperature fluctuations. Benefits: Low gloss appearance Low temperature ductility Wide range of performance Superior processability Lot to lot consistency Good chemical resistance&& |
| Product Description | |
|---|---|
| Supplier | Trinseo |
| Generic | PC+ABS |
| Material Status | Commercial: Active |
| Features | Excellent Processability,Ductility,Solvent resistance,Heat Stabilized,Low Gloss |
| Availabilitys | North America,Latin America |
| Process Methods | Injection Molding |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.13 | g/cm³ | ASTM D792 |
| Density | 1.13 | g/cm³ | ISO 1183/B |
| Density | 1.13 | g/cm³ | ISO 1183-2 |
| Melt Flow Rate | |||
| 260℃，3.80kg | 4.5 | g/10min | ISO 1133 |
| 230℃，3.80kg | 4.5 | g/10min | ASTM D1238 |
| Melt Volume Rate | |||
| 230℃，3.8 kg | 1.00 | cm³/10min | ISO 1133 |
| Shrinkage rate | 0.60 | % | ISO 294-4 |
| MD | 0.60 | % | ASTM D955 |
| Water absorption rate | |||
| 23℃，24hr | 0.15 | % | ASTM D570 |
| 23℃，24hr | 0.15 | % | ISO 62 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile modulus | 2500 | MPa | ISO 527-2 |
| Tensile modulus | 2090 | MPa | ISO 527-2 2 |
| 3.20 mm, injection molded | 2340 | MPa | ASTM D638 |
| tensile strength | |||
| Fracture, 3.20 mm, injection molded | 53.8 | MPa | ASTM D638 |
| Yield, 3.20 mm, injection molding | 53.1 | MPa | ASTM D638 |
| yield | 51.0 | MPa | ISO 527-2 |
| yield | 48.0 | MPa | ISO 527-2 2 |
| Tensile strain | |||
| Fracture, 3.20 mm, injection molded | 130 | % | ASTM D638 |
| fracture | 120 | % | ISO 527-2 |
| Yield, 3.20 mm, injection molding | 5.0 | % | ASTM D638 |
| yield | 4.5 | % | ISO 527-2 |
| yield | 4.9 | % | ISO 527-2 2 |
| Nominal strain at break | > 50 | % | ISO 527-2 2 |
| Bending modulus | 2300 | MPa | ISO 178 |
| 3.20 mm, injection molded | 2340 | MPa | ASTM D790 |
| bending strength | 78.0 | MPa | ISO 178 |
| 3.20 mm, injection molded | 80.7 | MPa | ASTM D790 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Charpy Notched Impact Strength | |||
| 23℃ | 45.0 | kJ/m² | ISO 179/1eA 2 |
| -30℃ | 30.0 | kJ/m² | ISO 179/1eA 2 |
| Charpy impact strength | |||
| 23℃ | No Break | ISO 179/1eU 2 | |
| -30℃ | No Break | ISO 179/1eU 2 | |
| Impact strength of cantilever beam notch | ASTM D256 | ||
| -30 ℃, 3.2mm, injection molding | 530 | J/m | ASTM D256 |
| 23 ℃, 3.2mm, injection molding | 640 | J/m | ASTM D256 |
| Impact strength of cantilever beam notch | ISO 180 | ||
| -40℃ | 24 | kJ/m² | ISO 180 |
| -30℃ | 32 | kJ/m² | ISO 180 |
| 23℃ | 52 | kJ/m² | ISO 180 |
| Dart impact equipped with measuring instruments | ASTM D3763 | ||
| -29℃，3.20 mm，Peak Energy | 62.1 | J | ASTM D3763 |
| 23℃，3.20 mm，Peak Energy | 56.5 | J | ASTM D3763 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 1.8 MPa, unannealed, 3.2 mm | 107 | ℃ | ASTM D648 |
| 1.8 MPa, unannealed | 106 | ℃ | ISO 75-2/A |
| 1.8 MPa | 104 | ℃ | ISO 75-2 2 |
| 0.45 MPa, unannealed, 3.2 mm | 129 | ℃ | ASTM D648 |
| 0.45 MPa, unannealed | 128 | ℃ | ISO 75-2/B |
| 0.45 MPa | 126 | ℃ | ISO 75-2 2 |
| Vicat Softening Temp | 143 | ℃ | ASTM D1525 4 |
| Vicat Softening Temp | |||
| B50 | 128 | ℃ | ISO 306 2 |
| — | 142 | ℃ | ISO 306/A120 |
| B50 | 128 | ℃ | ISO 306 |
| Linear coefficient of thermal expansion | |||
| MD：-40~82℃ | 7.4E-5 | 1/℃ | ASTM D696 |
| MD | 7.5E-5 | 1/℃ | ISO 11359-2 2 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | |||
| 60°，Smooth | 25 | ASTM D542 | |
| GMCP88（Light Stipple） | 6.5 | % | ASTM D542 |
| Monticello | 3.3 | % | ASTM D542 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. Tested in accordance with ISO 10350. 23°C/50%r.h. unless otherwise noted. |
| 3. 21.7 ft/sec |
| 4. Rate A (50°C/h), Loading 2 (50 N) |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |