PULSE™ XT9215

About
PULSE 9215 is an easy flow, high-heat, low density mineral filled PC/ABS resin delivering optimized performance for automotive exterior component applications requiring low CLTE for a better dimensional stability. Benefits Very low CLTE for an improved dimensional stability (smaller gaps) and a better fit and finish for optimal quality High ductility and easy flow for more design freedom (larger/longer parts, optimized wall thickness)and better economics (improved cycle time) Significant density advantage (up to 10% compared to a PC/PET) for lighter parts and optimized costs Faster cycle times for a better process cost control High gloss for painted applications with enhanced paint adhesion Applications Spoilers Exterior trims Roof bows Roof rails&&

About

PULSE 9215 is an easy flow, high-heat, low density mineral filled PC/ABS resin delivering optimized performance for automotive exterior component applications requiring low CLTE for a better dimensional stability. Benefits Very low CLTE for an improved dimensional stability (smaller gaps) and a better fit and finish for optimal quality High ductility and easy flow for more design freedom (larger/longer parts, optimized wall thickness)and better economics (improved cycle time) Significant density advantage (up to 10% compared to a PC/PET) for lighter parts and optimized costs Faster cycle times for a better process cost control High gloss for painted applications with enhanced paint adhesion Applications Spoilers Exterior trims Roof bows Roof rails&&

Product Description
Supplier	Trinseo
Generic	PC+ABS
Material Status	Commercial: Negative
Features	Good surface appearance,High liquidity,Sprayable,Quick molding cycle,Low density,Heat Resistance, Good
Availabilitys	North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.25	g/cm³	ISO 1183/B
Apparent density	0.63	g/cm³	ISO 60
Melt Flow Rate
260℃，5.0kg	22	g/10min	ISO 1133
Spiral flow length	44.0	cm
Shrinkage rate	0.30 to 0.60	%	ISO 294-4
VOC Content	15.0	µg/g	VDA 277

MECHANICAL	Nominal value	Unit	Test method
Tensile modulus	4600	MPa	ISO 527-2
tensile strength
yield	58.0	MPa	ISO 527-2/50
Tensile strain
fracture	20	%	ISO 527-2/50

IMPACT	Nominal value	Unit	Test method
Charpy Notched Impact Strength			ISO 179/1eA
-30℃	8.0	kJ/m²	ISO 179/1eA
23℃	20	kJ/m²	ISO 179/1eA

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
1.8 MPa, unannealed	108	℃	ISO 75-2/A
Vicat Softening Temp
B50	134	℃	ISO 306
Linear coefficient of thermal expansion
MD：-30~80℃	3.5E-5	1/℃	ISO 11359-2

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	120	°C
Drying time	5.5	hr
Processing (melt) temperature	255 to 280	°C
Mold temperature	60 to 80	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.