| About |
|---|
| Applications: For shoe sole, foam applications. Characteristics: High mechanical strength, impact resistance, easy processing, seal strength, high speed processing. CB1001 is additive free.&& |
| Product Description | |
|---|---|
| Supplier | Sumitomo |
| Generic | PE |
| Material Status | Commercial: Active |
| Features | Good Rigidity,Excellent Processability,High impact resistance,Quick molding cycle |
| Availabilitys | Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 0.912 | g/cm³ | JIS K7112 |
| Melt Flow Rate | |||
| 190℃，2.16kg | 0.20 | g/10min | JIS K6922-1 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Tensile impact strength | 900 | kJ/m² | ASTM D1822 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Melting temperature | 100 | ℃ | DSC |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Shore hardness | |||
| Shaw’s D | 48 | JIS K7215 | |
| tensile strength | |||
| fracture | 24.0 | MPa | JIS K7113 |
| Tensile strain | |||
| fracture | 830 | % | JIS K7113 |
| Bending modulus | 120 | MPa | ASTM D747-70 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |