Moplen EP300C - SOLIAO

About
Moplen EP300C Moplen EP300C is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP300C is a block copolymer typically used by customers in sheet and thermoforming applications. Moplen EP300C resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen EP300C Moplen EP300C is a polypropylene impact copolymer manufactured using the Spheripol process. Potential applications include sheet and profile extrusion, as well as thermoforming. Other specific applications may include food packaging and trays.&&

About

Moplen EP300C Moplen EP300C is the polypropylene block copolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen EP300C is a block copolymer typically used by customers in sheet and thermoforming applications. Moplen EP300C resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact.&&Moplen EP300C Moplen EP300C is a polypropylene impact copolymer manufactured using the Spheripol process. Potential applications include sheet and profile extrusion, as well as thermoforming. Other specific applications may include food packaging and trays.&&

Product Description
Supplier	LyondellBasell
Generic	HMS PP
Material Status	Commercial: Active
Features	Good Rigidity,Excellent Processability,Food contact compliance,Block Copolymer,Good melt strength,Good Tensile Strength,Impact copolymer
Availabilitys	Africa & Middle East ,Asia Pacific
Process Methods	Thermo forming

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	0.50	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch			ASTM D256
-20 ℃, injection molding	59	J/m	ASTM D256
23 ℃, injection molding	690	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp	152	℃	ASTM D1525

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	87		ASTM D785
tensile strength
Yield, injection molding	31.4	MPa	ASTM D638
Tensile strain
Yield, injection molding	10	%	ASTM D638
Bending modulus
injection molding	1080	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.