SI-LINK™ DFDB-5400 NT

About
SI-LINK™ DFDB-5400 NT is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5425 and is moisture curable. The specific gravity of the system is 1.04. It is recommended for use in low voltage power cable and industrial cable applications. SI-LINK™ DFDB-5400 NT is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030 in. insulation wall thickness, at a 25% loading with 70% SI-LINK™ DFDA-5451 NT and 5% SI-LINK™ DFDB-5480 NT. UV resistance allowing the wire to be printed “SunRes” may be achieved with the addition of a UV stabilizer package. The formulation for such an additive is available upon request and the resulting product is bulletinized by UL as DFDB-5425 UV. For accelerated curing applications SI-LINK™ DFDB-5400 NT can be used in conjunction with SI-LINK™ AC DFDB-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ AC DFDA-5488 NT Polyethylene to form a flame retardant SI-LINK™ AC polyethylene insulation system. This system is recognized by UL as DFDB-5425 AC. It is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030″ wall thickness, at a 25% loading with 70% SI-LINK™ DFDB-5451 NT and 5% SI-LINK™ AC DFDA-5488 NT. SPECIFICATIONS The DFDB-5425 systems are bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2. They are also suitable for CSA RW-90, and RWU-90 applications.&&

About

SI-LINK™ DFDB-5400 NT is a RoHS (Reduction of Hazardous Substances)-compliant flame retardant masterbatch designed to be used in conjunction with SI-LINK™ DFDA-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ DFDB-5480 NT Polyethylene to form a flame retardant SI-LINK polyethylene insulation system. This system is bulletinized by UL as DFDB-5425 and is moisture curable. The specific gravity of the system is 1.04. It is recommended for use in low voltage power cable and industrial cable applications. SI-LINK™ DFDB-5400 NT is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030 in. insulation wall thickness, at a 25% loading with 70% SI-LINK™ DFDA-5451 NT and 5% SI-LINK™ DFDB-5480 NT. UV resistance allowing the wire to be printed “SunRes” may be achieved with the addition of a UV stabilizer package. The formulation for such an additive is available upon request and the resulting product is bulletinized by UL as DFDB-5425 UV. For accelerated curing applications SI-LINK™ DFDB-5400 NT can be used in conjunction with SI-LINK™ AC DFDB-5451 NT Polyethylene and the catalyst masterbatch SI-LINK™ AC DFDA-5488 NT Polyethylene to form a flame retardant SI-LINK™ AC polyethylene insulation system. This system is recognized by UL as DFDB-5425 AC. It is formulated to pass the UL-44 horizontal burn test on 14 AWG (1.63 mm) wire, 0.030″ wall thickness, at a 25% loading with 70% SI-LINK™ DFDB-5451 NT and 5% SI-LINK™ AC DFDA-5488 NT. SPECIFICATIONS The DFDB-5425 systems are bulletinized by UL for XHH, XHHW, XHHW-2, RHH, RHW, RHW-2, SIS, USE and USE-2. They are also suitable for CSA RW-90, and RWU-90 applications.&&

Product Description
Supplier	DOW
Generic	PE
Material Status	Commercial: Active
Features	Weather resistance is good
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.04	g/cm³	ASTM D792
The degree of cross combination	> 80	%	ASTM D2765A

elastic body	Nominal value	Unit	Test method
tensile strength	2000	MPa	ASTM D412
Tensile strain
fracture	300	%	ASTM D412

Aging performance	Nominal value	Unit	Test method
Change in Relative Permittivity			UL 44
1-14 days	2.0	%	UL 44
7-14 days	1.0	%	UL 44
Tensile strength retention rate
7 days，121℃	80	%	ASTM D412
Elongation retention rate
7 days，121℃	80	%	ASTM D412

THERMAL	Nominal value	Unit	Test method
thermal deformation
131℃	< 20	%	UL 44
thermosetting
Elongation rate: 200 ℃	< 50	%	IEC 60811-2-1

Electrical performance	Nominal value	Test method
Relative permittivity	3.00	UL 44
Capacitance		UL 44
pf，1 day：90℃	750	UL 44
pf，14 days：90℃	750	UL 44
pf，7 days：90℃	750	UL 44

FLAME CHARACTERISTICS	Nominal value	Unit	Test method
Extreme oxygen index	26	%	ASTM D2863
Flame test
Horizontal	Pass		UL 44

Supplementary information	Nominal value	Unit	Test method
Crushing Test	6005	N	UL 44
Flexibility – 4 hrs（-25℃）	No visible cracks		UL 854

Process Conditions
Extrusion	Nominal value	Unit	Test method
Drying temperature	66	°C
Drying time	4.0 to 6.0	hr
Barrel 1 zone temperature	149	°C
Barrel 3 zone temperature	160	°C
Barrel 5 zone temperature	171	°C
Melt temperature	185	°C
Head temperature	171	°C
Nozzle temperature	171	°C

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.