Synthos EPS® 0822FR/CZ

About
Synthos EPS®/CZ types 0513FR, 0514FR 0822FR, 1640FR and 2040FR are self-extinguishing expandable polystyrene EPS with low content of pentane. The materials are formed by spherical polystyrene particles that contain a flame retardant system (content of HBCD < 0,5%) and a hydrocarbon blowing agent. Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. Synthos EPS® 0822FR/CZ (Koplen 0822FR) is mainly used for production of blocks with medium and higher density; of cutted boards and profiles from the blocks for a thermal insulation e.g. building objects or in packaging technology.&&

About

Synthos EPS®/CZ types 0513FR, 0514FR 0822FR, 1640FR and 2040FR are self-extinguishing expandable polystyrene EPS with low content of pentane. The materials are formed by spherical polystyrene particles that contain a flame retardant system (content of HBCD < 0,5%) and a hydrocarbon blowing agent. Their surface is treated against gluing during processing and the formation of electrostatic charge. Due to the content of halogenated flame retardant and the residual blowing agent, the product is unsuitable for objects intended for direct contact with food. Synthos EPS® 0822FR/CZ (Koplen 0822FR) is mainly used for production of blocks with medium and higher density; of cutted boards and profiles from the blocks for a thermal insulation e.g. building objects or in packaging technology.&&

Product Description
Generic	PS (EPS)
Material Status	Commercial: Active
Features	Flame Characteristics,Self-extinguishing,Halogenated
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Apparent density	0.02 to 0.04	g/cm³	Internal Method
Moisture content	< 10000	ppm	Internal Method
Particle size
>95% between	0.800 to 2.20	mm	Internal Method

FLAME CHARACTERISTICS	Nominal value	Test method
Reaction to Fire
—	Class E	EN 13501-1
—	B1	DIN 4102

Supplementary information	Nominal value	Unit	Test method
Blowing Agent	< 5.5	wt%	Internal Method

Notes
1. Typical properties: these are not to be construed as specifications.
2. The typical bulk density indicates values obtained during single-step pre-foaming on continuous pre-foaming devices Lower values of bulk density can be achieved only after multiple pre-expansion.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.