Mowiflex™ FXY 478

About
Modified, Liquid Mowiflex TC is the trademark of Kuraray’s new polymer compound especially designed for the requirements of thermoplastic processing. The new polyvinyl alcohol-based resin is non-toxic and can be processed by standard thermoplastic technologies (blown film extrusion, injection moulding, etc.). At the same time, Mowiflex TC acquires all the advantageous properties of polyvinyl alcohol (PVA): It is soluble in water, forms clear and glossy films and shows high tensile strength. The properties of the Mowiflex TC compound can be well adjusted to the requirements of the desired application. Materials produced with Mowiflex TC provide excellent weldability and bonding, are easily printable and have a low electrostatic surface charge. These characteristics make the compound an ideal resin for packaging materials or as an inliner to standard packaging systems. Due to its excellent water solubility, Mowiflex TC can be used as a temporary binder as well. Additionally the compound is colourable, which makes it possible to process Mowiflex TC as a highly concentrated masterbatch. As a single component, Mowiflex TC forms films with a high barrier effect towards O2, N2, CO2, and organic substances such as fragrances and aromas. Due to its chemical structure and physical properties, Mowiflex TC is an ideal additive to standard plastics as well: Its high tensile strength for instance enable individual modification of the mechanical properties of the end product. Added to Polyamid, the water vapour permeability is dramatically enhanced. Mowiflex TC additionally can be used as an additive to biodegradable products because when dissolved in water it is biodegradable (according to Zahn Wellens Test). Kuraray Specialities Europe supplies Mowiflex TC in standard and in customized grades, modified to meet the precise needs of your desired application. All grades are delivered as pellets, which are dust-free when processed and allow for simple and safe handling.&&

Product Description
SupplierKuraray
GenericPVOH
Material StatusCommercial: Active
FeaturesGood Clarity,Good surface appearance,Good Printability,Retention of aroma ,Biodegradable,Moisture resistance,Good Tensile Strength,Block resin,Welding,Nontoxicity,Water soluble,Good coloring,Agglomerability
AvailabilitysNorth America,Asia Pacific,Europe
Process MethodsInjection Molding

Technical Data
PHYSICALNominal valueUnitTest method
Melt Flow Rate
190℃,21.6kg31 to 47g/10min
Solution viscosity9 to 13mPa·sASTM D445

THERMALNominal valueUnitTest method
Glass transition temperature34.0DSC
Melting temperature178

Supplementary informationNominal valueUnitTest method
nonvolatile content> 99%

Process Conditions
ExtrusionNominal valueUnitTest method
Melt temperature183 to 188°C

Notes
1. Typical properties: these are not to be construed as specifications.
2. 8% aquaeous solution at 20°C determined by Hoppler-viscometer
【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.