EUROPLEX® Film HC 0F045

About
EUROPLEX® Film HC 0F045 is a weather resistant, transparent and optical quality co-extruded PMMA and PVDF film for graphic lamination systems. This film displays excellent performance in long term outdoor weathering without experiencing color change or yellowing. EUROPLEX® Film HC 0F045 provides high protection for other polymeric substrates against degradation caused by UV radiation. Due to its PVDF top layer, the film displays very good chemical resistance, anti-soiling and easy to clean effect. Application EUROPLEX® Film HC 0F045 can be laminated as a protective top layer onto polymeric films and sheets based on PVC, ABS, PC and ASA. Decorative films protected with EUROPLEX® on top can be thermoformed and laminated on different substrates, such as PVC profiles, or used in molding processes such as In-Molding Decoration. In labels or Graphic Arts, EUROPLEX® Film HC 0F045 can be used as a high quality clear overlay in laminate systems for high UV and weathering protection. Chemical resistant, anti-soiling and easy to clean effects are achieved.&&

About

EUROPLEX® Film HC 0F045 is a weather resistant, transparent and optical quality co-extruded PMMA and PVDF film for graphic lamination systems. This film displays excellent performance in long term outdoor weathering without experiencing color change or yellowing. EUROPLEX® Film HC 0F045 provides high protection for other polymeric substrates against degradation caused by UV radiation. Due to its PVDF top layer, the film displays very good chemical resistance, anti-soiling and easy to clean effect. Application EUROPLEX® Film HC 0F045 can be laminated as a protective top layer onto polymeric films and sheets based on PVC, ABS, PC and ASA. Decorative films protected with EUROPLEX® on top can be thermoformed and laminated on different substrates, such as PVC profiles, or used in molding processes such as In-Molding Decoration. In labels or Graphic Arts, EUROPLEX® Film HC 0F045 can be used as a high quality clear overlay in laminate systems for high UV and weathering protection. Chemical resistant, anti-soiling and easy to clean effects are achieved.&&

Product Description
Supplier	Evonik
Generic	PVDF+PMMA
Material Status	Commercial: Active
Features	Weather resistance is good,Clean,Solvent resistance
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.19	g/cm³	DIN 53479
surface tension
PVDF side	23	mN/m	DIN 53364

film	Nominal value	Unit	Test method
tensile strength
yield	38.0	MPa	ISO 527-3
Tensile strain			ISO 527-3
yield	6.0	%	ISO 527-3
fracture	> 50	%	ISO 527-3

optical performance	Nominal value	Unit	Test method
Transmittance	92.0	%	ISO 13468-2
Haze	3.0	%	ASTM D1003
UV Transmittance – 280 – 380 nm	< 1.5	%	DIN EN 410

Supplementary information	Nominal value	Unit	Test method
Accelerated weathering resistance
method A，cycle 1，65% RH	No Visible Change		ISO 4892-2

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.