Cardia Biohybrid™ H-FM

About
Cardia Biohybrid™ H-FM is based on a blend of thermoplastic starch (TPS) and polyolefin’s. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is a renewable material. A Biohybrid resin for foaming applications where biodegradability is not required. For use in applications where the use of renewable resources are desired. Can be used with chemical and physical blowing agents Cardia Biohybrid™ H-FM is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a range of products manufactured by foam extrusion. Due to its high content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities. Applications Extrusion foaming of packaging shapes Extrusion foaming of sheet for packaging and cushioning Extruded boards for packaging and insulation applications&&

About

Cardia Biohybrid™ H-FM is based on a blend of thermoplastic starch (TPS) and polyolefin’s. This grade of resin is compatibilised to offer a high level of mechanical strength, good elongation properties and toughness. The resin is based on corn starch which is a renewable material. A Biohybrid resin for foaming applications where biodegradability is not required. For use in applications where the use of renewable resources are desired. Can be used with chemical and physical blowing agents Cardia Biohybrid™ H-FM is formulated with 50% of renewable thermoplastic starch polymer. This resin is suitable for a range of products manufactured by foam extrusion. Due to its high content of polyolefins the material is not a fully biodegradable polymer and is not intended for ultimate disposal in commercial composting facilities. Applications Extrusion foaming of packaging shapes Extrusion foaming of sheet for packaging and cushioning Extruded boards for packaging and insulation applications&&

Product Description
Generic	TPS+PP
Material Status	Commercial: Active
Features	Good Rigidity,Good flexibility,Renewable resources,Foaming performance,Food contact compliance,Good Tensile Strength
Availabilitys	Africa & Middle East ,North America,Asia Pacific,Europe
Process Methods	Foam extrusion molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.10	g/cm³	ASTM D4883
Melt Flow Rate
190℃，2.16kg	3.6	g/10min	ASTM D1238
water content	< 0.60	%
Biomass content
Starch	50	%

THERMAL	Nominal value	Unit	Test method
Melting peak temperature	165	℃	ASTM D3418

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.