Jampilen RP340N

About
“Jampilen RP340N” is a polypropylene random copolymer which features extremely high flow properties, excellent transparency, high gloss and exhibits good antistatic properties. “Jampilen RP340N” is mainly designed for transparent housewares and quality packaging applications. It is an outstanding grade for injection molded containers and thin-walled packaging where clarity is ofutmost importance. In many of these applications, “Jampile RP340N” can replace PS since it can match the optical properties whilst adding low weight, low odor transfer, chemical resistance and impact strength. Features: High flow properties Excellent transparency High gloss Good antistatic properties Random copolymer Typical Applications: Injection molded containers and thin-walled packaging Clear containers Household articles Packaging for food, cosmetics and pharmaceutical products Lids, caps and closures Coextrusion with other polypropylene resins to produce multilayer sheet for thermoforming trays for fresh pasta and bakery products Sports, Leisure and toys&&

About

“Jampilen RP340N” is a polypropylene random copolymer which features extremely high flow properties, excellent transparency, high gloss and exhibits good antistatic properties. “Jampilen RP340N” is mainly designed for transparent housewares and quality packaging applications. It is an outstanding grade for injection molded containers and thin-walled packaging where clarity is ofutmost importance. In many of these applications, “Jampile RP340N” can replace PS since it can match the optical properties whilst adding low weight, low odor transfer, chemical resistance and impact strength. Features: High flow properties Excellent transparency High gloss Good antistatic properties Random copolymer Typical Applications: Injection molded containers and thin-walled packaging Clear containers Household articles Packaging for food, cosmetics and pharmaceutical products Lids, caps and closures Coextrusion with other polypropylene resins to produce multilayer sheet for thermoforming trays for fresh pasta and bakery products Sports, Leisure and toys&&

Product Description
Generic	PP copolymer
Material Status	Commercial: Active
Features	Good Clarity,Good surface appearance,High impact resistance,High liquidity,Low odor,Food contact compliance,Random copolymer,Solvent resistance,Antistatic property
Availabilitys	Africa & Middle East ,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.900	g/cm³	ASTM D1505
Melt Flow Rate
230℃，2.16kg	11	g/10min	ASTM D1238

IMPACT	Nominal value	Unit	Test method
Impact strength of cantilever beam notch
23℃	85	J/m	ASTM D256

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	83.0	℃	ASTM D648
Vicat Softening Temp	128	℃	ASTM D1525 2
Accelerate oven aging
150℃	360	hr	ASTM D3012

optical performance	Nominal value	Unit	Test method
gloss
60°	85		ASTM D2457
Haze
1000 µm	9.0	%	ASTM D1003

MECHANICAL	Nominal value	Unit	Test method
Rockwell hardness
R-level	94		ASTM D785
tensile strength
yield	28.0	MPa	ASTM D638
Tensile strain
yield	12	%	ASTM D638
Bending modulus	1050	MPa	ASTM D790

Notes
1. Typical properties: these are not to be construed as specifications.
2. Loading 1 (10 N)
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.