Virantage® VW-10300 P, FP & SFP

About
Virantage® VW-10300 polyethersulfone (PESU) is a non-functionalized, high-temperature sulfone polymer powder. Three grades are offered: Virantage® VW-10300P, Virantage® VW-10300FP, and Virantage® VW-10300SFP providing three particle sizes to meet formulators’ specific needs. Their inherent toughness imparts damage tolerance to thermoset composites. Virantage® PESU polymers also offer superior thermal and hydrolytic stability that deliver best-in-class hot-wet performance. These amorphous thermoplastics may be used to toughen a variety of advanced thermoset composites used to produce high-performance aerospace components. Virantage® PESU tougheners have been used successfully in a variety of thermosetting resin systems including epoxies, phenolics and BMIs. All Virantage® PESU polymers are produced at Solvay’s state-of-the-art, world-scale facility in Panoli, India under ISO 9001:2000 and ISO 14001:2004 certified quality management systems.&&

About

Virantage® VW-10300 polyethersulfone (PESU) is a non-functionalized, high-temperature sulfone polymer powder. Three grades are offered: Virantage® VW-10300P, Virantage® VW-10300FP, and Virantage® VW-10300SFP providing three particle sizes to meet formulators’ specific needs. Their inherent toughness imparts damage tolerance to thermoset composites. Virantage® PESU polymers also offer superior thermal and hydrolytic stability that deliver best-in-class hot-wet performance. These amorphous thermoplastics may be used to toughen a variety of advanced thermoset composites used to produce high-performance aerospace components. Virantage® PESU tougheners have been used successfully in a variety of thermosetting resin systems including epoxies, phenolics and BMIs. All Virantage® PESU polymers are produced at Solvay’s state-of-the-art, world-scale facility in Panoli, India under ISO 9001:2000 and ISO 14001:2004 certified quality management systems.&&

Product Description
Supplier	Solvay
Generic	PES
Material Status	Commercial: Active
Features	Good flexibility,Hydrolysis stability,High Heat Resistance,Heat Stabilized,Amorphous
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Solution viscosity	800	mPa·s	Internal Method
Residual solvents
Measured by gas chromatography	0.20	%	Internal Method
Particle size
VW-10300FP	63.0	µm
VW-10300P	500	µm
VW-10300SFP	45.0	µm
humidity
Measured during packaging	1.0	%	Internal Method

THERMAL	Nominal value	Unit	Test method
Glass transition temperature	220	℃	DSC

Notes
1. Typical properties: these are not to be construed as specifications.
2. 25% solution in DMAc at 40°C
3. Virantage® PESU is hygroscopic and may absorb moisture in storage. Dry no higher than 130°C for a minimum of 3 hours if needed.
4. Typical Particle Size ~D90 Particle sizes by sieve measurement
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.