ForTii® Ace MX51

About
30% Glass Reinforced, Stable to heat, for Automotive applications Special Features: Heat stabilized or stable to heat Used In: Structural Parts with ForTii® Ace ForTii® is a breakthrough high temperature polyamide with halogen-free flame retardant grades for demanding applications in the electronics, lighting, automotive, white goods, industrial and aerospace industries. We developed ForTii® in close co-operation with leading OEMs and tier 1 connector and socket manufacturers to ensure we give our customer what they want €” and need. That means a high temperature polyamide with a broad and versatile portfolio of grades that deliver high performance with a unique balance of properties.

About

30% Glass Reinforced, Stable to heat, for Automotive applications Special Features: Heat stabilized or stable to heat Used In: Structural Parts with ForTii® Ace ForTii® is a breakthrough high temperature polyamide with halogen-free flame retardant grades for demanding applications in the electronics, lighting, automotive, white goods, industrial and aerospace industries. We developed ForTii® in close co-operation with leading OEMs and tier 1 connector and socket manufacturers to ensure we give our customer what they want €” and need. That means a high temperature polyamide with a broad and versatile portfolio of grades that deliver high performance with a unique balance of properties.

Product Description
Supplier	DSM
Generic	PA 4T
Material Status	Commercial: Active
Features	Heat Stabilized
Availabilitys	Africa & Middle East ,North America,Latin America,Asia Pacific,Europe
Process Methods	Injection Molding

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	1.44	g/cm³	ISO 1183
Water absorption rate
Equilibrium, 23 ℃, 50% RH	1.9	%	ISO 62

MECHANICAL	Nominal value	Unit
Tensile modulus
—	11000	MPa
120℃	10000	MPa
150℃	7500	MPa
160℃	6200	MPa
180℃	5000	MPa
200℃	4500	MPa
tensile strength
fracture	170	MPa
Fracture, 120 ℃	140	MPa
Fracture, 150 ℃	110	MPa
Fracture, 160 ℃	97.0	MPa
Fracture, 180 ℃	85.0	MPa
Fracture, 200 ℃	75.0	MPa
Tensile strain
fracture	2.0	%
Fracture, 120 ℃	2.1	%
Fracture, 150 ℃	3.5	%
Fracture, 160 ℃	4.5	%
Fracture, 180 ℃	5.7	%
Fracture, 200 ℃	6.0	%

IMPACT	Nominal value	Unit
Charpy Notched Impact Strength
-30℃	9.0	kJ/m²
23℃	9.0	kJ/m²
Charpy Unnotch Impact strength
-30℃	40	kJ/m²
23℃	45	kJ/m²

THERMAL	Nominal value	Unit	Test method
Hot deformation temperature
0.45 MPa, unannealed	330	℃	ISO 75-2/B
1.8 MPa, unannealed	317	℃	ISO 75-2/A
Melting temperature	335	℃	ISO 11357-3

Process Conditions
injection	Nominal value	Unit	Test method
Drying temperature	100 to 130	°C
Drying time	2.0 to 4.0	hr
Barrel rear temperature	320 to 340	°C
Barrel middle temperature	330 to 350	°C
Barrel front temperature	330 to 350	°C
Nozzle temperature	340 to 370	°C
Processing (melt) temperature	340 to 370	°C
Mold temperature	80 to 200	°C
Injection speed	中等偏快
Back pressure	0.500 to 3.00	MPa
Screw compression ratio	2.5:1.0

Notes
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.