| About |
|---|
| PPG 3601 is a copolymer polyol especially designed for the production of flexible slabstock foam. It can be used in blend with conventional polyether polyol for the production of enhanced and high load bearing foam. The foam produced with such blends shows a hardness increase proportional to the level of CPP added.&& |
| Product Description | |
|---|---|
| Supplier | Kumho Petrochemical |
| Generic | POP |
| Material Status | Commercial: Active |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| PH value | 6.0 to 8.5 | ||
| water content | < 0.10 | % | |
| acid value | < 0.10 | Mg/g | |
| viscosity | |||
| 25℃ | 0.850 to 1.20 | Pa·s | |
| Supplementary information | Nominal value | Unit | Test method |
|---|---|---|---|
| Hydroxyl Value | 39.0 to 44.0 | Mg/g |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 1H20/10MeOH |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |