Lucofin® 1400MN Powder

About
Lucofin 1400 MN Powder is a polar copolymer consisting of ethylene and butyl acrylate with low crystallinity. Due to its chemical structure Lucofin 1400 MN Powder is softer and more flexible than ethylene homopolymeres with comparable density. Lucofin 1400 MN Powder is supplied as uncoloured and without additives granules. Lucofin 1400MN Powder can be used for polymer modification and improve: for compounds, the compatibility and absorptive capacity of minerals, fillers, pigments and additives the flexibility in rotomoulding applications the heat resistance in bitumen, without negative influence on the cold flexibility Product advantages flexibility impact strength at low temperatures (- 40 °C) thermal stability of polymer (no corrosive by products) good mechanical properties high end use temperature good compatibility and filler acceptance good organoleptics environmentally sound heat resistance Applications Lucofin 1400MN Powder can be used in the following applications: as supporting material for compounds in rotomoulding for polymer modification of bitumen and asphalt for powder coating&&

About

Lucofin 1400 MN Powder is a polar copolymer consisting of ethylene and butyl acrylate with low crystallinity. Due to its chemical structure Lucofin 1400 MN Powder is softer and more flexible than ethylene homopolymeres with comparable density. Lucofin 1400 MN Powder is supplied as uncoloured and without additives granules. Lucofin 1400MN Powder can be used for polymer modification and improve: for compounds, the compatibility and absorptive capacity of minerals, fillers, pigments and additives the flexibility in rotomoulding applications the heat resistance in bitumen, without negative influence on the cold flexibility Product advantages flexibility impact strength at low temperatures (- 40 °C) thermal stability of polymer (no corrosive by products) good mechanical properties high end use temperature good compatibility and filler acceptance good organoleptics environmentally sound heat resistance Applications Lucofin 1400MN Powder can be used in the following applications: as supporting material for compounds in rotomoulding for polymer modification of bitumen and asphalt for powder coating&&

Product Description
Supplier	Lucobit
Generic	EBA
Material Status	Commercial: Active
Features	Good flexibility,Alkali resistant,Acidproof,High Heat Resistance,Good sensory characteristics.,Copolymer,low-temperature impact resistance,Heat Stabilized,Resistance to salt water/fog
Availabilitys	Europe

Technical Data
PHYSICAL	Nominal value	Unit	Test method
Density	0.924	g/cm³	ISO 1183
Melt Flow Rate
190℃，2.16kg	7.0	g/10min	ISO 1133
Particle size	500	µm	ASTM D1921

THERMAL	Nominal value	Unit	Test method
Vicat Softening Temp
A50	60.0	℃	ISO 306/A50
Melting temperature
DSC	95.0	℃	ISO 3146

Supplementary information	Nominal value	Unit	Test method
Comonomer BA	17	%	DIN 51451

MECHANICAL	Nominal value	Unit	Test method
Shore hardness			ISO 868
Shaw’s A	88
Shaw’s D	32
Tensile modulus	45.0	MPa	ISO 527-2
tensile strength
yield	3.50	MPa	ISO 527-2
Tensile strain
yield	13	%	ISO 527-2

Notes
1. Typical properties: these are not to be construed as specifications.
【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.

Notes

1. Typical properties: these are not to be construed as specifications.

【 Disclaimer 】
Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials.