| About |
|---|
| Skyrol® SH96D is an optically clear and anti-static pretreated polyester film. SH96D is primarily used as substrates for microfilm, overhead projector film and laminating film, since its anti-static property can be retained after several uses and is seldom influenced by humidity.&& |
| Product Description | |
|---|---|
| Supplier | SKC |
| Generic | PET |
| Material Status | Commercial: Active |
| Features | Optical performance,Antistatic property |
| Availabilitys | North America,Asia Pacific,Europe |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Density | 1.40 | g/cm³ | ASTM D1505 |
| Shrinkage rate | Internal Method | ||
| MD：150℃，0.086 mm，30 min | 1.5 | % | Internal Method |
| MD：150℃，0.107 mm，30 min | 1.5 | % | Internal Method |
| TD：150℃，0.086 mm，30 min | 1.0 | % | Internal Method |
| TD：150℃，0.107 mm，30 min | 0.90 | % | Internal Method |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| friction coefficient | ASTM D1894 | ||
| With oneself – dynamic | 0.30 | ASTM D1894 | |
| With oneself – dynamic | 0.30 | ASTM D1894 | |
| With oneself – static | 0.30 | ASTM D1894 | |
| With oneself – static | 0.30 | ASTM D1894 |
| film | Nominal value | Unit | Test method |
|---|---|---|---|
| tensile strength | ASTM D882 | ||
| MD, yield, 86 µ m | 214 | MPa | ASTM D882 |
| MD, yield, 110 µ m | 200 | MPa | ASTM D882 |
| TD, yield, 86 µ m | 234 | MPa | ASTM D882 |
| TD, yield, 110 µ m | 228 | MPa | ASTM D882 |
| Tensile strain | ASTM D882 | ||
| MD, fracture, 86 µ m | 150 | % | ASTM D882 |
| MD, fracture, 110 µ m | 160 | % | ASTM D882 |
| TD, fracture, 86 µ m | 110 | % | ASTM D882 |
| TD, fracture, 110 µ m | 110 | % | ASTM D882 |
| optical performance | Nominal value | Unit | Test method |
|---|---|---|---|
| gloss | ASTM D523 | ||
| 86.0 µm | 174 | ASTM D523 | |
| 107 µm | 173 | ASTM D523 | |
| Transmittance | ASTM D1003 | ||
| 86.0 µm | 89.0 | % | ASTM D1003 |
| 107 µm | 89.0 | % | ASTM D1003 |
| Haze | ASTM D1003 | ||
| 86 µm | 3.2 | % | ASTM D1003 |
| 107 µm | 4.0 | % | ASTM D1003 |
| Notes |
|---|
| 1. Typical properties: these are not to be construed as specifications. |
| 2. 107.4 µm |
| 3. 86 µm |
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |