| About |
|---|
| KOPELEN FC-340R是用于薄膜的抗冲击嵌段共聚聚丙烯树脂。 FC-330R具有很少的鱼眼和高强度以及优异的抗冲击性，这是由于高度结晶的均匀基质和最佳的橡胶形态的理想组合。 它还具有优异的耐热性，在蒸煮灭菌过程中表现出优异性能。 |
| Product Description | |
|---|---|
| Supplier | LOTTE |
| Generic | PP copolymer |
| Material Status | Commercial: Active |
| Features | High impact resistance,Heat Resistance, Good |
| Technical Data | |||
|---|---|---|---|
| PHYSICAL | Nominal value | Unit | Test method |
| Melt index | 5.0 | g/10min | ASTM D1238 |
| Density | 0.90 | g/cm³ | ASTM D792 |
| MECHANICAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Bending modulus | 1270 | Mpa | ASTM D790 |
| tensile strength | |||
| yield | 27 | Mpa | ASTM D638 |
| Tensile strain | |||
| fracture | >100 | % | ASTM D638 |
| THERMAL | Nominal value | Unit | Test method |
|---|---|---|---|
| Hot deformation temperature | |||
| 0.45 MPa | 105 | ℃ | ASTM D648 |
| melting point | 164 | ℃ | ASTM D3418 |
| IMPACT | Nominal value | Unit | Test method |
|---|---|---|---|
| Impact strength of cantilever beam notch | |||
| 23℃ | 88 | J/m | ASTM D256 |
| -10℃ | 34 | J/m | ASTM D256 |
| Notes |
|---|
| 【 Disclaimer 】 Guangzhou Soliao Information Technology Co., Ltd. reserves all rights. The information in this data table was obtained from the manufacturer of the material on soliao.com. Soliao.com makes every effort to ensure the accuracy of this data. However, the search company does not assume any responsibility for the uncertainty and consequences caused to users by these data values and suggestions, and strongly recommends verifying the data values with the material supplier before the final selection of materials. |